- Dual furling headsails - minimum separation & other concerns
- And your Favorite Winch Cleaning Solvent is?
- Quick fix hatches.
- looking for a used furler
- A Newbie's Furler Question
- Main Sail Runner (or not)
- Genny Opinions
- Turnbuckles and toggle jaws
- New Sails! Advice Needed.
- Time to shop: Furler
- Rigger in Punta Gorda and Ft Myers
- What SS wire is this-Suitable for standing rigging?
- Port lights
- Standing Rigging Replacement
- Dorade Launcher
- Drainage or weep hole in a deck stepped mast
- What is this part and where can I get one?
- Trucker's Hitch
- BOOM tents
- Setting up for screecher sail on 42ft cat
- Recutting an Old Spinnaker into a Drifter?
- Securing a Sailbag that is Hard to Reach
- Mast Climbing monkey Daytona Beach area?
- Releasing the Cap and Intermediate Shrouds
- Load Bearing Spreaders/Mast Ladder
- Electric to manual winch conversion
- Spinlock Clutches
- First Haul Out
- Kites, Parafoils and Parasails - after a Demasting?
- Rod in front of mast
- Reviews for Contender Low Aspect Polypreg Pro Sail Cloth?
- Parrel Beads vs. Mast Hoops?
- Parasailor owners
- Installing New Lifelines
- Optimum Sail Material for Large Performance Cruiser, Chapter 12
- Running Backstay Installation
- Mast boot and/or Spartite
- Galv rigging - accounting for the extra stretch
- Sail Advice Needed Urgently
- Convert "discontinuous" to "continuous" shrouds?
- Lifeline Netting
- Secondhand Sails
- LOOS TENSION GAUGE
- Mast steps
- Isomat discontinuous spreader fitting?
- Mast track rivets
- taylorht
- EcoTuff from Eco Safety products.
- How To Lower The Mast!
- C&C 41 Running Backstays
- Twin headstays
- Chainplates
- Replacing Chain Under Bowsprit
- Help Understanding my Rig...
- Bent Mast Repair
- Strength of cable terminations - wire rope grips vs swaged
- Wire rope/stays from Korea, What to Think?
- Can I Paint And Work On Mast While Still Upright And Attached To Boat?
- What Size Halyards And Sheets?
- Do It Yourself PVC Roller Furler
- Replacement Sheave source
- Anyone know where to get these chain pipes?
- Reefing -Why Put Both Eyes On the Gooseneck " Horns "?
- Galvanized standing rigging - a few reservations
- Why Use Shackles to Attach Halyards?
- Navtec IA6-10 Backstay fluid top up
- Offshore Sails - Are High-end Worth the $$
- What Type of Line for Reefing Pendants?
- Name for this Doohickey, Please
- Deck Hatch Question
- CDI FF2 Genoa furling
- Slab Reefing , Ready to Go?
- Wanted: Genoa / jib for Pearson 36-2
- Blade Jibs
- Antal Winch Maintenance
- Staysail Stay Tension
- Welding vs Fittings for Rails
- Tight Wraps/Big Winds
- Any one dealt with China Sail Factory?
- Reefing Staysail .. How?
- Sudden Stemhead Chainplate Fitting Rust - Time to Worry?
- UFO sound, deck stepped mast, cheap topping lift
- Has anyone tried these brakes?
- Thru-bolting dinghy chocks?
- Problems if I remove my mainsail battens?
- Marlow-Hunter Rigging.
- Backstay Adjuster question - Merriman
- Barber Hauler Madness
- Is this Crevice Corrosion or a Bad Casting?
- Galvanized Standing Rigging: Is it Safe? How to Know?
- Help with names...
- Easiest/Best way to make Winch and cheek block pads?
- What hardware to bring halyards over a cabin house?
- Needed: Winch - Barbarossa ST92
- Questions About my Stanchions
- 2 sheets, 1 winch
- New England Ropes swallowed up
- Maintaining Tension on Running Backstays
- Doyle Stackpack Question...
- Mainsail Track and car recommendations?
- thoughts about lowering and securing a jib
- Rope Clutch Preventing Jib Being Lowered?
- Furler Line Routing
- Noobie Question: preventing twisted lines
- End to End Splicing Sta-Set of Different Diameters
- Replacing Rod Rigging
- Hardware Mystery
- Spinnaker Rigging - Islander 28
- Storm sails and rigging
- How do you splice modern ropes?
- Solar Panel Draft Affecting Wind Vane Function?
- Aries wind vane ... should I buy a spare "servo rudder" ?
- Bird devices
- Best Stack Pack?
- Leading Main Halyard Below Deck
- Help me Work out my Foredeck Layout
- A little corrosion(?) on my lifeline fittings. Concerned?
- Dutchman boom brake
- Cockpit Reefing - Sail Slug & Track Mods
- Harken Backstay Adjuster
- Preventing Overriding Turns on Jib Roller Furling Drums
- Replacing halyards and jib sheets
- Do you recognize these portlights?
- Emergency Crank for Nilsson Windlass?
- Would you like a separate section on CF on knots and splicing?
- Is a Repaired Boom Sound for Long Term Cruising?
- [1984 Ericson 38] Thoughts on converting T-balls to through bolted tangs
- Harken 8 classic winch
- deck winch
- Update storm sail on torsion rope furler
- Ross Norgrove's idea... double main sheet... what we think ?
- broken part where to buy
- Roller Furling Question..
- Replacing wire halyards with line on Columbia 26 MKII
- Zeppelin Bend - next best thing to sliced bread
- what type of boat is this
- Time to re-sail
- Mast slider fitting
- Blade Jib
- Location of reefing winch ?
- Boom as engine hoist
- Dolphin striker question -->
- Pullpit and pushpit needed.
- Rigging for Pacific Seacraft Flicka
- Electric winches slowing down - problem lurking?
- Running Lines Color Scheme?
- Using Retired Rigging as Lifelines
- "Cupple" for Norseman fitting?
- Electric wenches
- How Do You Tie a Double Sheet Bend?
- Sailboat repair
- New Bend?
- Replacing roller furling drum
- Stupid Knot Question
- Dyneema Cord/Poly Webbing Jacklines Questions
- Double Sheet Bend Query
- Code zero furler for staysail
- New sail for the circumnavigating Bene 423
- Presenting a New Hitch : the EStar-XX (based on EStar Hitch)
- Luff tape jumping out possibility ??
- Outhaul rigging
- Solent Stay
- Who's Your Favorite Sailmaker?
- Harken stay tensioner
- mast lowering info, video, etc...
- Morgan 22 rig tensions
- Barient Electric Winches
- Removable Cutter Stay vs Solent Stay
- Swan Neck?
- Making your own Light-Weather Sail
- Bridle for Spinnaker Pole
- Replacing antennae cable
- Spreader Light Placements
- Aries Wind Vane Shaft too Long
- Spreaders
- I need to choose a configuration for the staysail..
- Mainsheet Winch
- Whisker Pole Question
- Anyone have Harken T-Track Switch?
- Ideas Regarding Spray Cloths
- Stanchion Issue
- What Self Tailing will fit in my Barlow 22 holes?
- Sagging Boom
- Mast is buzzing
- Shround to spreader
- What is this / found on boat?
- Cleaning winches
- Sail Draft
- Polysulfides and stainless bad? Huh?
- Source for this Isomat mast tang?
- New haylards from masthead
- How to add second head sail halyard to small boat
- Service Navteq Hydraulic Integral Backstay Adjuster
- Selden mast car to Forespar Whisker pole?
- Barton Snatch Blocks
- advice on these terminals? (See pic )
- Going Forward
- Boots, there must be something different
- Looking for sparepart for older Harken Battcar
- Advice on main sheet and out haul
- Sailmaker in Bundaberg?
- Where does the name Genoa come from?
- Lewmar 43 drill pattern
- Furler Problems
- Going up the mast
- Raising bow chainplate instead of bowsprit?!
- Bavaria sailboat Stanchion base plates
- owner
- Problem servicing a 1970's Lewmar 43 winch
- Rig Tension?
- boom furler conversion
- Suggestions for boom restoration
- Whisker Pole Storage
- Harken jib furler modification
- Sheave at Masthead?
- Let's go fly a kite!
- Leech Line Adjustment
- Facnor SD-130 foil sections
- Advice on Rigging for a Spinnaker
- Furler Halyard Attachment
- Standing Rigging
- Climbing mast with steps
- Rerigging Problems
- mast repair
- Dedicated deck access sail locker?
- What is This? Pic of Spinnaker Pole Fitting
- Shroud Extensions?
- Pulling masts on Whitby 42 Ketch Need Info
- dang bridge
- Plastic Shroud Covers
- Tides sail track
- How do I rig this reef slab up?
- Hyde Stream Stay, repair or replace
- Stormjib size
- Cruising Laminates - What are they good for
- Single line reefing - Seldon
- Advice on external chainplate bolt placement
- Seeking used forestay release lever
- What would these pad eyes be for?
- Source for Rutgerson deck hardware
- Seeking Good Used Genny Cars and Track
- Torn Genoa -
- A new dodger for Eider
- Jib Sheet Selection
- Outboard Dimensions (suzuki, tohatsu, Honda, Yamaha)
- Painting A 30 Year Old Anodised Aluminium Mast
- Why is whipping twine waxed?
- Lewmar 48 EST alloy winch drum worn - sleeve it?
- How to prevent attachments to pullpit from sliding?
- What kind of mainsail attachment system do I need?