- Screws or rivets hardware to boom?
- dimensions of the Monitor windvane wheel attachment?
- Hunter Cherubini 33 Running Rigging
- How to get this lower shroud fitting out of my spreader?
- Z Spars in mast furling system - boom car failure
- Newer to me boat, help me identify this sail
- Rigging inspection needed in NYC/Brooklyn
- Retrofitting Downwind Poles
- Twin tracks on furler foil
- Surface rust on rigging-a problem?
- Inspection of Encapsulated Chainplates??
- Looking for a solution for my genoa
- Use old standing rigging? Ever had a failure?
- How much for standing rigging inspection?
- Hawsepipe and exposed deck core
- Rope halyard to shackle splice.
- What is the proper name for this type of sail
- Bronze hardware
- Code Zero
- Karver Gaff Lock experience?
- Motorsailer - battens or not?
- Disassembling profurl LC42
- Attaching fittings to curved mast section.
- Lewmar 43 Self tailing winch (circa 1980) reassembly
- rigging for a Code 0
- DYI rigging
- Pulling chainplates with the rig up
- Mainsail removal with Antal Mainsail Track Cars
- seized winch on Angelman Ketch
- Headsail conversions
- Hurricane wind effect on rigging on the hard
- New Sails ... sailcloth choice?
- Difference between Anderson winches?
- Lewmar 56 spares
- Drogue attachment to narrow sterns
- Rigging Inspection - Advice Requested
- Outhaul Line Replacement / Splice Help
- Equipment (Winches, etc.) From Hurricane Wrecks
- Replacing standing rigging on anchor
- Bottom Paint Alternatives
- Selden Furler - Forestay Adjustment
- Luffshuttle
- Add a Spinlock XAS clutch
- Attaching My Jordan series drogue Chaninplates??
- Lowering and raising mast
- Mast canted
- Jib sizes for hank-ons
- Eye splice
- Sheeting Angle, CCA design.
- Main Halyard Angle Too Great From Base Of Mast To Winch?
- question - tang strength vs. chainplate and shroud strength
- Seawind Cat Main Traveller Friction
- Replacing Block for In-Mast Furling Line
- Reefing with Bat Cars - where is the leech cringle?
- Which Electric Motor Does Harken Use? I need to replace one
- Australian Rope/Line
- Looking for a winch drum
- North Sails 3Di NorDac
- Headsail luff crease
- Measuring for a Rigid Boom Vang
- Replacing Traveler Car Bearings
- sail rigged wrong?
- Costs of returning from in-boom furling to standard (32' boat)?
- Morgan S22 swing keel help needed
- Two Poles on same halyard
- Small plastic fitting
- Seriously, why do people like in mast furling?
- Line Clutch for Halyards
- Galvanized standing rigging
- High friction when winching 16mm lines
- Spreader End Help
- Sail design software?
- Need advice on dodger glass
- Improving clutch lines
- ULLMAN U-STACK
- Bent Mast
- Wire breaking strength and pin diameter
- FREE Sailrite Sailmaker sewing machine
- Sewing machine Pfaff 130 - Struggling at 6 layers of dacron sailcloth?
- Navtec Hydraulic Cylinder Troubleshooting Help
- From Schooner to Sloop?
- Benefits of whisker pole?
- A ready market awaits an experienced rigger in Far North Queensland
- How to Replace Continuous Furling Line
- DIY Ropeye deck eyes?
- Polished Chainplates
- Does 2:1 halyard lessen load on mast head sheave?
- Swaging 10mm s/s wire rope
- Did Irma Wreck the Rigging?
- Winch question. Replace one or both?
- Stiff winches after cleaning
- Lazy Running Backstay and Checkstay
- Electric Windlass for Sabre 34 Mk1
- Storm jib, how to rig?
- Windlass Maxwell 800/Catalina 42
- CapeHorn compared to Windpilot
- Mast on 1983 Hunter 34 compatabity 1987
- Portlight screens
- DP or Challenge Code Zero sailcloth with Facnor 4500 or Karver KF5
- Forestay Cotter Pin Maintenance
- Dyneema instead of stainless for stays and shrouds
- BALLS OR ROD
- Harken ESP 2 Furler Experience?
- Hank on vs. furler for Solent stay
- Boom Hanger for Timber Boom
- Re-rigging a ketch to a sloop/cutter rig
- Help me replace this ancient sliding gooseneck
- New running rigging / rope and wire halyard
- Lewmar Electric Winch BOGO
- Carbon based cruising sails
- Radial sail for in mast furling?
- Milwaukee Right Angle Drill with Harken Chuck
- To sleeve or not to sleeve
- Time to replace genoa?
- Harvey Aftermath
- Testing standing rigging
- Use any sail loft, or one that reps my manufacturer?
- Garage find
- Stainless 316 1x19 wire corrosion?
- Replacing genoa with Code Zero
- Spinnaker Car Toggles
- Gooseneck Nut Comes Undone
- Exit Plates
- Problem with "Behind the Mast" furler
- Replacing a fixed length forestay.
- Acera vs Dyneema & Jordan Series Drogues
- Problems in installing a furlex 50S
- Modern Headsail Inventory for Coastal Cruisers
- Yankee or blade or...?
- US made Standing Rigging
- Flag on backstay
- REEFING GEAR - A QUESTION
- Buying extra Shackle PINS (they disappear, somehow)
- Adding a (retractable) bowsprit to a cutter?
- Winch upgrades - help me pick
- Dock line size question?
- gennaker with furler
- Best deck fills for live aboard
- What is this?
- This look right? Putting Boom Toggle on new Seldon Boom
- how to rig the stay sail?
- New jib not furling evenly
- Synthetic, Dynice Dux rigging, noise problems
- Toggles on delta palte for split backstay
- Pros and cons of cutter-rigged ketch?
- Winch Pawl for 1969 Columbia 22
- Damage to rigging?
- Gibsea 52 Master: Sparcraft mast: electromotor
- Seldon CX25 Furler
- Grease Nozzle for Furler Maintenance
- 330 meters of 10mm nylon twisted 3 strand rope
- Sizing main halyard
- hi wind and screecher unfurl
- Dyneema alternative to steering wheel chain?
- Island Packet Spar Maker(s)?
- Block and tackle boom vang attachment points
- Damage to mast at lower shrouds.
- •PROFURL Motorized Reefing-Furling System, Model ED42
- Murray Winch needle needle bearings
- In Mast Furling
- Your Sail Wardrobe: What's in it? What's on your wish list?
- Lazy Sheet as Barber Hauler?
- Barlow 32 winches
- Whisker Pole
- Passerelle - new wheels
- Check your chain plates!
- Lazarette stainless latch....
- DIY Wing Mast Questions
- Standing and running rigging
- Jammed older Profurl headsail furler
- Upper diamond rigging on Hunter DS
- Need some help identifying spar manufacture
- Swinomish channel navigation tips
- Winch Replacemnt
- Masthead Access Methods
- Backstay Crane Extension
- What's better for installing aluminum mast steps: rivets or tapped threads?
- Hoisted a GoPro, Can't Get It Down. Now What?
- Bilge trivia (identify spare parts)
- Adding a Anchor Davit
- Selden batten car problem
- Help in identifying this windvane
- How to tie a Diamond Knot
- Is walking foot necessary?
- Broken tap in mast
- Jib sheet soaked in Diesel
- Quarter Turning Blocks
- Confessions of a novice fancy worker
- Zippered jib cover instead of Sunbrella UV overlay.
- Running Rigging Question (lines on/ through the boom)
- Sooo many winches
- Code Zero
- Getting a taller mast
- Cutting down In Mast Furling Mast
- Rub rail keeps popping out
- Traveler on a Hallberg Rassy Rasmus
- boom to mainsheet block
- Lewmar switch for electric winch failure
- Introducing the "Crown Jewels Soft Shackle"
- Staysail Rigging. Is this proper? Image to show
- Forestay Tension for Cutters
- question for you mechanical engineers
- Sail Source
- Standing Rigging Costs
- Ocean Cruiser Main for sale
- New blocks for my Beneteau 411: which ones?
- What grease and oil to service old winches?
- Repairs to dodger
- Catalina 30 Anchor locker cleat
- Cleat in anchor locker - Catalina 30
- Anyone know a good step by step rigging book
- Used winches and sailing hardware in Fort Pierce?
- I need a new main sail
- bearing #'s fro ProFurl C420
- Adding a cutter rig / sloop to cutter conversion
- Removing blood stains from sails
- Selma fids are the way to go for double-braid
- Furling Line
- Partially furl the Genoa?
- Budget rig hardware
- Rod Rigging
- Spreader patches....
- Profurler/headstay tension
- Relocating the main sheet traveler
- PSC 34 Jackline Configuration
- Isomat spreader socket
- Mast Gate for Pearson 30
- Need mastgate (where sail sliders feed into mast) for a Pearson 30. Thanks!
- Don"t Hammer on the Door!
- Silver Rope Halyard???
- welding an aluminum spar
- How to re-use sta lok fittings?
- Having trouble with Harken Bat cars
- Winch Drum Bearing
- Identify babystay fitting
- Replacing the forestay without dropping the furling unit?
- C-30 Mk I - Mast Cover: Any reason not to add one?
- Harken mk1 furler torque tube screws
- An easy downwind sail
- Problem with 2 speed Barient winch.
- Rust never sleeps
- 1974 Bristol 27
- Forespar whisker pole - UXP or UTP end?
- Conduits in Isomat Mast???
- Island Packet chain plate replacement
- Metal on Metal Wear-N-Tear (aluminum)
- Paint on stainless polish
- Spinnaker track height ?
- Painting Anodized Aluminum
- Noobie needs splicing help