Help find chainplate bolts

[Wind River]

Originally Posted by Celestialsailor

For the OP and Sailor Russell, simply but 316 SS carriage bolts and a 1/4" square file. A minute amount of elbow grease and you do not even need some one holding the other side with a driver.

If the op's chain plates are any where near the thickness of mine doing this with a file would be a long, tedious process.

In my case that would be filing 200 corners! Even if it could be done in 3 minutes a corner, that would be over 10 hours of filing. My hands are cramping just thinking about that!