Cruisers Forum
 

Go Back   Cruisers & Sailing Forums > The Fleet > Multihull Sailboats
Cruiser Wiki Click Here to Login
Register Vendors FAQ Community Calendar Today's Posts Log in

Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 06-10-2023, 18:02   #3661
Registered User
 
Stingo's Avatar

Join Date: Aug 2005
Location: Portugal
Boat: Between boats at the moment aka Fender
Posts: 360
Re: Cheap Multis and Projects

Quote:
Originally Posted by unbusted67 View Post
This thing seems crazy.

"Perkins still runs fine just smokes a little and I started to take the wall paper down inside and didn’t finish so that needs completed. Both engines were running when I came here. The water pump on the Volvo needs replaced. Is is demasted and on hard. Has been since last winter. I would say there is 15k of work inside unless you can work on diesel engines yourself"

https://www.facebook.com/marketplace...2-cef6bd3ea284
Ben, are you selling this Prout or have you posted on behalf of someone?
Stingo is offline   Reply With Quote
Old 13-10-2023, 04:33   #3662
Registered User

Join Date: May 2021
Posts: 38
Re: Cheap Multis and Projects

What about this one?

Anyone have references for xboat.fr?

https://www.xboat.fr/4096-FOUNTAINE-PAJOT_MAHE-36.html

Diogo Cyrineu is offline   Reply With Quote
Old 14-10-2023, 09:04   #3663
Registered User
 
unbusted67's Avatar

Join Date: Dec 2006
Boat: Looking for a new boat
Posts: 2,553
Images: 24
Re: Cheap Multis and Projects

Quote:
Originally Posted by Stingo View Post
Ben, are you selling this Prout or have you posted on behalf of someone?
It’s just a listing I found hence the quotation marks. I’m going to go have a look at it tomorrow. Bracing for disappointment.
__________________
__________________________________________
Unbusted67 or just Ben
unbusted67 is offline   Reply With Quote
Old 14-10-2023, 16:28   #3664
Registered User

Join Date: Jul 2017
Location: UK
Boat: Summer Twins 25
Posts: 749
Re: Cheap Multis and Projects

Quote:
Originally Posted by unbusted67 View Post
It’s just a listing I found hence the quotation marks. I’m going to go have a look at it tomorrow. Bracing for disappointment.
Would love to hear about this one later, Admiral still not convinced on needing a bigger boat. - too many other issues at the moment anyway.
Shaneesprit is offline   Reply With Quote
Old 26-10-2023, 12:21   #3665
Registered User

Join Date: Jul 2017
Location: UK
Boat: Summer Twins 25
Posts: 749
Re: Cheap Multis and Projects

Know nothing of it
Dean Cat 365 - UK

https://www.ebay.co.uk/itm/126154142...edia=WHATS_APP
Shaneesprit is offline   Reply With Quote
Old 27-10-2023, 05:12   #3666
Registered User

Join Date: Jun 2014
Location: Ontario
Boat: 16' Canoe {Northern 25 previously}
Posts: 28
Re: Cheap Multis and Projects

https://www.multihullcentre.com/woods-eclipse-for-sale/
Jimmathieson is offline   Reply With Quote
Old 28-10-2023, 00:35   #3667
Registered User

Join Date: May 2014
Boat: Shuttleworth Advantage
Posts: 2,274
Images: 2
Re: Cheap Multis and Projects

Quote:
Originally Posted by Jimmathieson View Post

Always loved Woods - Sagitta and Eclipse models they sail exceptional well for this size range. This example looks really well sorted but would have to check the weight as lots of internal trim.
Tupaia is offline   Reply With Quote
Old 30-10-2023, 06:22   #3668
Registered User
 
Sun and Moon's Avatar

Join Date: Nov 2009
Location: Florida Atlantic coast
Boat: Bristol 29
Posts: 354
Re: Cheap Multis and Projects

Posted in it's own thread, with pictures. But it belongs here.
https://www.cruisersforum.com/forums...ml#post3836856


31' Jim Brown Searunner Trimaran
1974 31 foot Jim Brown Searunner trimaran. Built with marine ply with fiberglass covering. Well built and maintained. We have cruised to the Bahamas several times. She is a great, fast cruising boat with a shallow draft of 3 feet to get into shallow areas, and is very stable for deep water with a 6 foot draft with the center board down. Shelter has a kick-up rudder with stainless-steel housing. Bottom paint 2 years ago. Trampolines are in good condition. The A- frames are solid. There is plenty of storage in the amas. She is in need of a bit of epoxying and painting on the topsides. Inside, the counter needs to be covered due to some recent work. Still needs some TLC but I’m unable to finish due to my health.
Sails: Main, Stay, Yankee Jib, Genoa all in fair-good condition. New sail cover 3 years ago. 4 winches, 2 self-tailing.
Bimini with Isinglass enclosure for cockpit which is in good condition.
Engine: 2013 Yamaha 9.9 HP outboard which moves the boat well. The engine is able to be brought up to the level of the rail on it’s mount.
Galley: Dickinson 2 burner propane stove , Fresh and saltwater whale foot pumps, 25 gallon water tank, old Engel refrigerator
Head: Raritan manual head with 20 gallon holding tank
Anchors: 22# Bruce, 25# Danforth, 25# CQR
Electronics: Garmin GPS map 541s, depth sounder, VHS radio, battery monitor, solar panels, solar controller, small 400 watt inverter, deck lights

Asking $15,000.00
Located in Key Largo, FL
Please contact Brad at 786-972-9434
Sun and Moon is offline   Reply With Quote
Old 01-11-2023, 21:48   #3669
Registered User

Join Date: Jun 2008
Posts: 219
Re: Cheap Multis and Projects

here's a SR 31 project $10k on the opposite corner of the states: https://seattle.craigslist.org/see/b...680432836.html
epoxy (vs polyester-for most 70s boats, presumably) could be a significant bonus, but no pictures low-investment ad so I'm reluctant to even post it


big, probably too far gone, csk in FL https://miami.craigslist.org/pbc/boa...677651365.html


Menger 41 cat FL 50k https://www.facebook.com/groups/worl...ssenger_banner https://www.boattrader.com/boat/1981...maran-9094659/ (the catboat designer from NY?)
purvisgs is offline   Reply With Quote
Old 30-01-2024, 07:54   #3670
Registered User

Join Date: Jul 2017
Location: UK
Boat: Summer Twins 25
Posts: 749
Re: Cheap Multis and Projects

One in the UK
No interest in it other than it’s the same model as mine (There are only 9 of them)
https://apolloduck.net/743198
It is also on Ebay £25000
Shaneesprit is offline   Reply With Quote
Old 30-01-2024, 12:53   #3671
Registered User

Join Date: Jun 2008
Posts: 219
Re: Cheap Multis and Projects

Horstman 34 cat (project) in FL https://miami.craigslist.org/brw/boa...712778955.html
purvisgs is offline   Reply With Quote
Old 30-01-2024, 15:41   #3672
Registered User
 
unbusted67's Avatar

Join Date: Dec 2006
Boat: Looking for a new boat
Posts: 2,553
Images: 24
Re: Cheap Multis and Projects

Quote:
Originally Posted by unbusted67 View Post
It’s just a listing I found hence the quotation marks. I’m going to go have a look at it tomorrow. Bracing for disappointment.
Oh and to follow up on this: Not a nice boat. Don't buy.
__________________
__________________________________________
Unbusted67 or just Ben
unbusted67 is offline   Reply With Quote
Old 31-01-2024, 07:10   #3673
Registered User

Join Date: Apr 2023
Location: LI NY South Shore
Boat: Hirondelle Catamaran, now Dragonfly 800 Tri
Posts: 4
Re: Cheap Multis and Projects

This looks like a decent price on a Lerouge 26’ Tri

https://www.xboat.uk/PDFb-5514-CTI_TRIMARAN-PULSAR-26
Antsjh is offline   Reply With Quote
Old 22-03-2024, 05:30   #3674
Registered User

Join Date: Apr 2023
Location: LI NY South Shore
Boat: Hirondelle Catamaran, now Dragonfly 800 Tri
Posts: 4
Re: Cheap Multis and Projects

Here is a cool 28’ trimaran, similar to my Dragonfly 800. No idea what kind of shape it is in, but perfect for Long Island’s shallow south shore.

https://longisland.craigslist.org/bo...719511276.html
Antsjh is offline   Reply With Quote
Reply

Tags
cheap, paracelle


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Advertise Here


All times are GMT -7. The time now is 23:09.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.