I have two sources of speed through
water. Well, one is from a Nexus
network, which does not have a
sensor anymore but still transmits 0 kts all the time. And the other source is the real one.
I cannot set the comm priorities since STW does not show up there.
<GREEN>18:31:45 (N2000) PGN: 128259 Source: nmea2000 socketCAN-can0 ID: 0 Desc: DBoard: Speed through
water
<GREEN>18:29:34 (N2000) PGN: 128259 Source: nmea2000 socketCAN-can0 ID: 35 Desc: DBoard: Speed through water
Is there a way to force commpriorities to offer a choice on STW?
Best,
Manfred