- User Lists
Showing Profile Comments 1 to 7 of 7
Martin Hassellöv, Svanesund. Postade precis detta inlägg (förkortat). Skulle vi kunna ta ett snack. Ring gärna tel 44843.
Now I finally managed to get the RMRadar_PI beta 2.001 working on OpenCPN 4.8 Win10, Ramarine MFD E120+radar.
Then I brought the PC to the boat and connected the ethernet patch cable to the Raymarine High Speed, HS Switch, and then it could read the radar was present but not transmitting. When I set the Ethernet adaptor to the same IP as the radar+one on the last digit it also read the radar was transmitting, and it was also possible to get full control of the radar settings!!!
I tried ...to build the RMRadar_PI with the new WXwidgets to run under OpenCPN5.0, but couldnt compile it (sorry my ignorance .
The goal would: to build this plugin for OpenCPN5 under RasperryPI.
Hakan, I live on the same island. Please give me a call, you can find me in the eniro phonebook my name is M Hassellöv, Svanesund, local nr 44843.
Patch looks great, happy to be the test pilot of the wind offset patch. If you could email the patch to shayne_w_t at hotmail.com and any special install directions. I’m an ex automation programmer and reasonably confident with most PC stuff, however script for O is new to me.
You have helped me with Open CPN on windows 10 and its crashing. I updated to 613 and it has worked perfectly and quickly. Mistakenly I had a power failure on windows 10 upon restarting open Cpn had crashed, the hard drive had lost a lot of disk space and slowed a lot. I removed CPN and then reloaded it. All good except I can not download any plug ins and my previous settings were lost, that could have been me. I am no computer expert but I have photographed the error messages after the crash. I can forward to anyone interested if that helps others in diagnosing the problem. Mainly I am looking for advice on what I am doing wrong to not get plug ins. the install I can see them in the file but they will not come up after a reboot into the plug in site.
Any help appreciated
Colin SV avant garde
I have had a pm from rgleason, I offered to stream some radar data from my Koden radar to help create a plugin for it. He has suggested wireshark, which I have not looked at yet, but please tell me what infomation and data that you would require.
Hej Håkan, jag sitter i Bredared utanför Borås med en OpenCPN installerad på en Rasp.
Jag förstår att du har lite erfarenhet av det. Jag försöker få in Watchdog plugginen men den installerar ingenting. Jag har Raspbian som installerat OS och det är en jessie tror jag i botten. Jag är en komplett nybörjare på Linux. :-)
Har du någon erfarenhet av Watchdog på en Raspian installation med OpenCPN 4.0.0.?
Jag skriver detta på mejl eftersom det kan vara lite svårare för mig att förstå på engelska när det gäller installation och Linuxspråk.