Synthetic teak vs painted deck

[seatotaler]

Originally Posted by bcboomer

I think that Seacork have information on their site that should answer your questions. At least they used to, although I see they have diversified a lot since I bought mine.
I used their glue, uncaulked panels, strips and some plain cork. There is no caulk staining and the joints are caulked.
I did some tight curves that wouldn't stay in place with tape long enough for the glue to set so I used contact cement and then re-glued them a couple of years later when the contact cement gave up.
Once it is all down a light sanding removes the excess caulk.

Thanks for the info. Any issues with seagull crap or crows after they've had a feast of blackberries?

[bcboomer]

None at all. Imar boat soap has taken pretty much everything out. The only exception came clean with Starbrite Teak Cleaner & Brightener. Worst case you could always sand it a little.

[bcboomer]

Seatotaler Are you in BC? (blackberries)