Wiki: Links must match heading for export?

[rgleason]

What does this mean specifically?
I believe it has something to do with making the opencpn install documentation. Convertind the online manual.

I need to know how to do this so i can be sure it is workin properly.

There is some requirement I do not know about

Please enlighten us someone!!!

[ptulp]

Rick,

What I get from the mail from Thomas in the OpenCPN RC 4.1.1301 Release thread is that the link references in the document should exactly
match the names in the Table of Contents.

I found a problem in the Getting Started part:
Original:
Getting started using OpenCPN consists of 5 basic steps:

1. Read the rest of Getting Started , Basic Features and Advanced Features to learn about the program.
2. Install OpenCPN

Here step 2 says Install OpenCPN but the Table of Contents says Installing OpenCPN
This caused that in the document the link was not handled correct and still pointed to the online document i.s.o the export document.
When I edited the online document to Installing OpenCPN and ran the export again, the problem was solved.


The other problem I saw that in step 1 Getting Started was including a space and comma, so it was not processed correctly.


The problem still there is in step 1 Basic Features , this phrase cannot be found in the Table of Contents as it refers to the Options Settings use.


Hope this helps,
Peter

[ptulp]

Rick,

As a quick check you can hover over a link in the export document and see if it is pointing to something like:
opencpn.org/ocpn/ocpn_manual_export/#<linktext>

Peter