OpenCPN 5.6.2 - SignalK connection causes freeze

[hans-martijn]

Hi Bram,

I use these things: this case and this nvme ssd. Very cheap and very fast.

Hans

[hans-martijn]

Did my log make anything clear? There are a lot of null's, I know, and I know I'm still in the harbor when the log ran.
It'd make sense to start OpenCPN before I am underway though, and the speed OpenCPN hangs currently just lets me loosen one mooring line.

Hans

[verkerkbr]

Originally Posted by hans-martijn

Hi Bram,

I use these things: this case and this nvme ssd. Very cheap and very fast.

Hans

Hi Hans,

I had the same setup in use, but now switched tot the USB 3.1 flashdrive stick.

Bram

Addition,

you can try my setup on an usb flashdrive. I don't know where you live. My address is is near Zierikzee.

Send me a personal note for more details..


Bram

[bcn]

There are some news on Github about this (?) issue:
https://github.com/OpenCPN/OpenCPN/issues/2750

[verkerkbr]

Is a bit strange. Here in my setup with the input from an NMEA2000 Garmin GPS works fine without hiccups.


Canbus is a Canable board or an NGT-1 both running at 250000, RaspiOS64, SignalK 1.44 with an SK connection to OpenCPN. Route info is send back tot the SignalK server.

RPI4 2 GB with the latest kernel version. Is the problem caused by the type of canbus in the system?


Bram