Cruisers Forum
 


 
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 01-03-2007, 18:10   #1
Registered User

Join Date: Mar 2006
Location: Nevada City. CA
Boat: Sceptre 41
Posts: 3,857
Images: 9
Transducer

Hello All:

Just returned from a trip to BC. One of the goals was to install my plotter sounder/fish finder. I tried several locations on the hull for the transducer but the depth was always 2.5' Funny thing b/c I would have been high and dry if that were the case. When I let it down into the water there was a full 20' of depth. The instructions said that I could set the transducer in Epoxy and it would work fine.

Anyone have any ideas on what could be wrong? I'm pretty sure my hull is not cored but I am contacting the builder to find out. Booat is a Sceptre 41
__________________
Fair Winds,

Charlie

Between us there was, as I have already said somewhere, the bond of the sea. Besides holding our hearts together through long periods of separation, it had the effect of making us tolerant of each other's yarns -- and even convictions. Heart of Darkness
Joseph Conrad
Charlie is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
removing a Depth Sounder Thru Hull Transducer chuck711 Construction, Maintenance & Refit 14 19-02-2007 15:29
Info on Garmin 498 C Sounder. Opinions? Transome mounted Transducer? Opinions? chuck711 Marine Electronics 0 14-01-2007 16:06
Depth Meters Jimske Marine Electronics 16 28-08-2006 18:25
Depth Sounder Installation Steve Kidson Marine Electronics 1 12-06-2006 04:25
Depth Sounder Troubleshooting exposure Construction, Maintenance & Refit 9 10-02-2004 14:47

Advertise Here


All times are GMT -7. The time now is 02:54.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.