|
10-06-2020, 12:35
|
#1
|
Registered User
Join Date: Oct 2013
Posts: 286
|
Autopilot installation Oceanis 34
I’m helping a friend on installing a autopilot on a beneteua oceanis 34 from 2011. I think the best way is to put a raymarine linear drive on the starboard side aft. The wall in the starboard aft cabin seems to be linear to the quadrant and there is a pin on there that seem to be the place to hook it up. Anyone with a similar boat that have some pics or insights?
|
|
|
10-06-2020, 13:36
|
#2
|
Registered User
Join Date: Apr 2018
Posts: 379
|
Re: Autopilot installation Oceanis 34
Quote:
Originally Posted by Flod
I’m helping a friend on installing a autopilot on a beneteua oceanis 34 from 2011. I think the best way is to put a raymarine linear drive on the starboard side aft. The wall in the starboard aft cabin seems to be linear to the quadrant and there is a pin on there that seem to be the place to hook it up. Anyone with a similar boat that have some pics or insights?
|
Not familiar with the boat layout, but don't bolt anything onto the quadrant unless it is designed for that purpose. If unsure you should get a tiller arm fabricated. There are a few companies who do this including Edson.
|
|
|
10-06-2020, 13:43
|
#3
|
Registered User
Join Date: Nov 2019
Posts: 1,642
|
Re: Autopilot installation Oceanis 34
Quote:
Originally Posted by odonnellryan
Not familiar with the boat layout, but don't bolt anything onto the quadrant unless it is designed for that purpose. If unsure you should get a tiller arm fabricated. There are a few companies who do this including Edson.
|
Yes indeed
Best to use s separate tiller arm for the auto pilot
https://www.jefa.com/steering/products/rackandpinion/tillerlever.htm
|
|
|
10-06-2020, 14:02
|
#4
|
Registered User
Join Date: Oct 2013
Posts: 286
|
Re: Autopilot installation Oceanis 34
Thanks. It actually looks like the jeefa tiller arm in the link posted is already pre mounted on the quadrant. My guess is that beneteua makes all boats ready for autopilot install independent of if the first owner order this feature or not. I’ll see if I can post a pic
|
|
|
11-06-2020, 09:16
|
#5
|
Senior Cruiser
Join Date: Oct 2007
Location: 29° 49.16’ N 82° 25.82’ W
Boat: Pearson 422
Posts: 16,306
|
Re: Autopilot installation Oceanis 34
Two things. I have a RM linear mechanical drive on my P42 and love it. Aft cabin layout so the drive is right under my bunk but cannot hear it at all.
Power draw is reasonable and the speed and response so far been great but have not been out in really nasty stuff.
Will also add my caution about attaching to the quadrant but sounds like you've got that sorted.
By the way, I upgraded to a more powerful type 2 since my 42' is at the max rating for the type 1. If your friend doesn't already have the drive I'll make him/her a deal on the type 1. Lightly used and recently overhauled.
__________________
The water is always bluer on the other side of the ocean.
Sometimes it's necessary to state the obvious for the benefit of the oblivious.
Rust is the poor man's Loctite.
|
|
|
11-06-2020, 09:29
|
#6
|
Registered User
Join Date: Feb 2007
Location: Gig Harbor, WA
Boat: Tayana Vancouver 42ac
Posts: 1,206
|
Re: Autopilot installation Oceanis 34
Quote:
Originally Posted by Flod
I’m helping a friend on installing a autopilot on a beneteua oceanis 34 from 2011. I think the best way is to put a raymarine linear drive on the starboard side aft. The wall in the starboard aft cabin seems to be linear to the quadrant and there is a pin on there that seem to be the place to hook it up. Anyone with a similar boat that have some pics or insights?
|
I'm not familiar with the Beneteua Oceanis 34 layout. However, I am intimately familiar with the Raymarine linear drives.
After years of screwing around with the autopilot that came with the boat I got on the Internet, downloaded the technical installation instructions and discovered that the previous owner had the autopilot installed all wrong...it wasn't even close to correct.
To begin with Raymarine (bought out Autohelm) makes two versions of the linear drive (short and long) and they have differing install measurements to consider. The long linear drive (that's what I have) requires more linear space to install than the short for full performance which can easily limit install locations.
Accurately determine which unit (long or short) you have and follow the appropriate install instructions measurements. And yes, use a tiller arm; mine is an Edson.
Good Luck.
~ ~ _/) ~ ~ MJH
|
|
|
11-06-2020, 10:06
|
#7
|
Senior Cruiser
Join Date: Oct 2007
Location: 29° 49.16’ N 82° 25.82’ W
Boat: Pearson 422
Posts: 16,306
|
Re: Autopilot installation Oceanis 34
Quote:
Originally Posted by MJH
To begin with Raymarine (bought out Autohelm) makes two versions of the linear drive (short and long) and they have differing install measurements to consider. The long linear drive (that's what I have) requires more linear space to install than the short for full performance which can easily limit install locations.
|
Well to nit pick a little, they make three versions. Type 1 short, Type 2 short, Type 2 long, the Type 2 being a more powerful unit.
I think most of the parts are identical but a stronger motor in the Type 2.
For a 34' boat the Type 1 should have more than enough power unless he needs the long version.
__________________
The water is always bluer on the other side of the ocean.
Sometimes it's necessary to state the obvious for the benefit of the oblivious.
Rust is the poor man's Loctite.
|
|
|
11-06-2020, 10:09
|
#8
|
Senior Cruiser
Join Date: Oct 2007
Location: 29° 49.16’ N 82° 25.82’ W
Boat: Pearson 422
Posts: 16,306
|
Re: Autopilot installation Oceanis 34
Quote:
Originally Posted by MJH
After years of screwing around with the autopilot that came with the boat I got on the Internet, downloaded the technical installation instructions and discovered that the previous owner had the autopilot installed all wrong...it wasn't even close to correct.
|
By the way, what detail or more likely details, did the PO get wrong in the install? As you well know after dealing with it there's several things you have to get right: rudder centered with the throw of the drive, drive not hitting the rudder stops, angle of the drive in all planes to the rudder post, etc.
Fortunately the drive on my boat was professionally installed (not necessarily a guarantee of a correct install but mine was right) and it was a drop in to swap out the Type 1 for a Type 2.
__________________
The water is always bluer on the other side of the ocean.
Sometimes it's necessary to state the obvious for the benefit of the oblivious.
Rust is the poor man's Loctite.
|
|
|
11-06-2020, 11:51
|
#9
|
Registered User
Join Date: Feb 2007
Location: Gig Harbor, WA
Boat: Tayana Vancouver 42ac
Posts: 1,206
|
Re: Autopilot installation Oceanis 34
Quote:
Originally Posted by skipmac
By the way, what detail or more likely details, did the PO get wrong in the install? As you well know after dealing with it there's several things you have to get right: rudder centered with the throw of the drive, drive not hitting the rudder stops, angle of the drive in all planes to the rudder post, etc.
Fortunately the drive on my boat was professionally installed (not necessarily a guarantee of a correct install but mine was right) and it was a drop in to swap out the Type 1 for a Type 2.
|
Trying to answer both of your posts in one. Raymarine has obviously expanded their line since I bought my boat in 2007 when there was only two linear drives.
Regarding the install: there was no tiller arm but a jury rig to the quadrant, the type 2L linear drive install location did not allow the full extension of the actuating arm, the rudder reference was not properly positioned. In a nutshell, whoever did the install wasn't reading the system requirements in choosing a location in the boat's tight canoe stern. With a lot of measuring I was able to find the one place that the type 2L linear drive would fit properly and with the help of a ABYC tech got it installed with a tiller arm.
~ ~ _/) ~ ~ MJH
|
|
|
11-06-2020, 12:38
|
#10
|
Senior Cruiser
Join Date: Oct 2007
Location: 29° 49.16’ N 82° 25.82’ W
Boat: Pearson 422
Posts: 16,306
|
Re: Autopilot installation Oceanis 34
Quote:
Originally Posted by MJH
Trying to answer both of your posts in one. Raymarine has obviously expanded their line since I bought my boat in 2007 when there was only two linear drives.
Regarding the install: there was no tiller arm but a jury rig to the quadrant, the type 2L linear drive install location did not allow the full extension of the actuating arm, the rudder reference was not properly positioned. In a nutshell, whoever did the install wasn't reading the system requirements in choosing a location in the boat's tight canoe stern. With a lot of measuring I was able to find the one place that the type 2L linear drive would fit properly and with the help of a ABYC tech got it installed with a tiller arm.
~ ~ _/) ~ ~ MJH
|
I guess the AP computer setup could limit the travel of the drive arm but that install risked damaged something if the drive had been allowed to go beyond the rudder stops. Sounds like a very amateur install.
By the way, I was wrong about the models. I believe RM now offers 24V options as well.
__________________
The water is always bluer on the other side of the ocean.
Sometimes it's necessary to state the obvious for the benefit of the oblivious.
Rust is the poor man's Loctite.
|
|
|
11-06-2020, 13:05
|
#11
|
Registered User
Join Date: Oct 2013
Posts: 286
|
Re: Autopilot installation Oceanis 34
Thanks for the replies. I will measure which drive unit that is the most suitable. However I think buying a to long unit is manageable since the ACU limit the travel after first commission. A to short unit would be worse...
I have a rotary drive on my boat and it could of course spin around way out of the quadrant travel if it went berserk. But as I mentioned you set the boundaries when doing commission
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Rate This Thread |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Advertise Here
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
Vendor Spotlight |
|
|
|
|
|