Water use gauge on Lagoon 380 broken

[gspeak]

Hi All,
The Water Use Gauge on our Lagoon 380 has stopped working & is stuck on "0". Has anybody got any ideas what could be the problem or where I can get replacements.

I prefer the Use Gauge as against Water Tank Level Gauges as it tells me all I need to know eg. when I need to switch tanks etc.

As you can see in the photos there is an inline meter / sender unit under the galley sink which has an electrical sender mounted on the front that is wired to a simple digital readout on the main panel above the Nav Table.






Thanks in advance

Dave

[JPA Cate]

If you inspect, check for broken wires, and clean all the electrical connections between the meter and the readout, you may be lucky, and it'll work fine again!