Cruisers Forum
 

Go Back   Cruisers & Sailing Forums > Life Aboard a Boat > Liveaboard's Forum
Cruiser Wiki Click Here to Login
Register Vendors FAQ Community Calendar Today's Posts Log in

Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 15-03-2009, 16:13   #1
Registered User
 
Red Charlotte's Avatar

Join Date: Jul 2007
Location: Crossing the Pacific
Boat: Hans Christian 36'
Posts: 191
Hanging Pictures on Bulkhead

Hello,

We'd like to hang this painting on our bulkhead. I've seen a lot of picture frames just screwed directly into the bulkhead of boats. I really like this picture frame though, it was a gift with the painting.

Does anyone know of any hardware that would sort of "cup" the painting? I'm not sure of the correct vocabulary, but I want something that would come up and around the frame on all sides to hold it securely to the bulkhead.

Let me know if I need to be more specific. I can picture it perfectly in my head but may not be describing it accurately. Many thanks!

Red Charlotte is offline   Reply With Quote
Old 15-03-2009, 16:35   #2
Registered User
 
Big Moe's Avatar

Join Date: Sep 2008
Location: Voorhees,NJ
Boat: I have just purchased a 2009 49 Beneteau named Paradise II
Posts: 41
Images: 8
Send a message via AIM to Big Moe Send a message via Yahoo to Big Moe
Hello from Big Moe:

I double sticky back tape all my pictures in my main salon. Use the "Red", thick, all weather,tape. If the bulkhead is not completely level you can use a little more or less tape in each corner. I also used the wire hanger in the center just to be sure. Ill leave a picture, for your review, in my gallery: Big Moe

P.S. I needed a crowbar to get the picture off the wall when I bought a new boat!
Big Moe is offline   Reply With Quote
Old 15-03-2009, 16:45   #3
Senior Cruiser

Cruisers Forum Supporter

Join Date: Mar 2006
Location: San Diego
Boat: Passport 47 CC
Posts: 467
Images: 24
Send a message via Yahoo to SV Someday Came
Glue Gun

I use a glue gun -- as can be seen with Gary the Gecko. In fact, the frame above is attached with a GG. I use the GG for all pictures -- and sometimes cabling. I don't like tape over time and heat.
Attached Thumbnails
Click image for larger version

Name:	IMG_0604.jpg
Views:	543
Size:	49.5 KB
ID:	7440  
SV Someday Came is offline   Reply With Quote
Old 15-03-2009, 16:53   #4
Registered User
 
Minggat's Avatar

Join Date: Apr 2008
Location: South Pacific
Boat: Islander 36
Posts: 1,593
Agreed.... I think. If we're talking about the same tape, the plastic seperator that keeps the tape from sticking to itself on the roll is the only red part. The double sided tape itself is gray.

My DVD player has been mounted on a bulkhead for years with this stuff. I am not looking forward to ever removing it.

I (try to) keep a roll of this stuff on board. Handy to have around.
__________________
Minggat
Minggat is offline   Reply With Quote
Old 15-03-2009, 16:57   #5
Registered User
 
captain465's Avatar

Join Date: Mar 2007
Location: Ft Lauderdale, FL
Boat: 43 ft Selene/Solo
Posts: 688
Go to a hardware store and ask for mirror mounting brackets. They are clear plastic and clamp the mirror or painting to the bulkhead. It will take 8 of them, 2 at each corner at 90 degrees to each other. One screw into the bulkhead for each bracket.
__________________
Do not go where the path may lead.........
go instead where there is no path........
and leave a trail.
Ralph Waldo Emerson
captain465 is offline   Reply With Quote
Old 16-03-2009, 00:15   #6
Long Range Cruiser
 
MarkJ's Avatar

Join Date: Dec 2007
Location: Australian living on "Sea Life" currently in England.
Boat: Beneteau 393 "Sea Life"
Posts: 12,822
Images: 25
We found a better idea!!!!!!

In the harwear store look for thse picture hanging thingies. The look like velcro.
You stick both sides to the back of the picture and then onto the wall. The wall side sticks and then you can rip the velcro off to remove the picture.

The whole sticky velcro removes from the wall with a pull down tab when you have finished with it.

None of our photos have fallen off at sea


Mark
__________________
Notes on a Circumnavigation.
OurLifeAtSea.com

Somalia Pirates and our Convoy
MarkJ is offline   Reply With Quote
Old 16-03-2009, 04:06   #7
CF Adviser
 
Pelagic's Avatar

Join Date: Oct 2007
Boat: Van Helleman Schooner 65ft StarGazer
Posts: 10,280
There are many types of artwork mounting hardware that is hidden and basically allows you to insert and lock down heavy paintings onto the bulkhead so that it can survive thru a storm even if someone accidentally grabs hold of it.

Take a look at this site for examples of no wire, hidden, low profile cleat hangers and security types

Picture Hang Solutions: Hooks, Hangers, Wire, Hardware

Just send them the photo and description of your art piece and explanation that it needs to be boat secure and they will give you a recommendation.
Pelagic is offline   Reply With Quote
Old 16-03-2009, 05:06   #8
Registered User

Join Date: Jul 2008
Location: East about Circumnavigation
Boat: Spray Replica
Posts: 144
G'day Charlotte,

We have used the the Security Hangers that Pelagic posted above.



The drawing that we have hanging in Sobraon's Saloon is an rare artwork of the original Sobraon drawn by a very good friend. It has a heavy bronze and timber frame and measures 3ft x 3ft. We have had it on the bulkhead for 5 years and have been in some very big seas and it has never moved.



We purchased ours from a framing supplier and they were not expensive. The also allow you to unlock and remove the picture if you need to.

Fair winds

Garry and Wendy
SV Spirit of Sobraon
Spirit of Sobraon - www.sobraon.talkspot.com
sobraon is offline   Reply With Quote
Old 16-03-2009, 07:10   #9
Registered User
 
SouthernComfort's Avatar

Join Date: Oct 2008
Location: Kemah, TX
Boat: O'day 322 "Southern Comfort"
Posts: 85
I would say exhaust your search for ways to hang anything without putting holes in your boat. The frame you have does not look heavy, so I say go with the velcro looking wall hanger Markj mentioned. I used them to hang my barometer/clock/therm. and they work very well.
SouthernComfort is offline   Reply With Quote
Old 16-03-2009, 08:23   #10
CF Adviser
 
Pelagic's Avatar

Join Date: Oct 2007
Boat: Van Helleman Schooner 65ft StarGazer
Posts: 10,280
Garry and Wendy.... Nice web site and photos..... Looks like you guys are having fun
Pelagic is offline   Reply With Quote
Old 16-03-2009, 08:33   #11
Registered User
 
Red Charlotte's Avatar

Join Date: Jul 2007
Location: Crossing the Pacific
Boat: Hans Christian 36'
Posts: 191
Thank you all SO MUCH for the suggestions and recommendations. We'll let you know what we end up doing!
Red Charlotte is offline   Reply With Quote
Old 16-03-2009, 08:49   #12
Registered User
 
Doghouse's Avatar

Join Date: May 2006
Location: Hampton Roads, va
Boat: Catalina 387 - Magical Dreamer
Posts: 176
Images: 1
Command Adhesive strips. That way you can change were things are. I even use them to mount my second chartplotter to the wall. It works great.
Doghouse is offline   Reply With Quote
Old 16-03-2009, 09:45   #13
Registered User
 
senormechanico's Avatar

Join Date: Aug 2003
Boat: Dragonfly 1000 trimaran
Posts: 7,162
What ever you use, be prepared to experience a "ghost" of the covered area when you remove the painting.
The bulkhead will have faded but not the covered area.

We have a very small quilt velcroed to the bulkhead which has a heat reflective layer inside. We take it down and protect the table during meals which have hot serving dishes such as a cassserole.

Steve B.
senormechanico is offline   Reply With Quote
Old 16-03-2009, 16:57   #14
Registered User
 
svHyLyte's Avatar

Join Date: Mar 2006
Location: Tampa Bay area, USA
Boat: Beneteau First 42
Posts: 3,961
Images: 25
Remember--Anything actually "hanging" becomes a missle when--not if (unless it's a harbor queen)--the yacht gets knocked down. Remember too that sheets of glass over a picture bolted to a bulkhead become shards of glass when they are hit by flying debris unless they are covered with clear adheasive plastic.

FWIW...

s/v HyLyte
__________________
"It is not so much for its beauty that the Sea makes a claim upon men's hearts, as for that subtle something, that quality of air, that emanation from the waves, that so wonderfully renews a weary spirit."
svHyLyte is offline   Reply With Quote
Old 16-03-2009, 17:02   #15
Registered User

Join Date: Jul 2006
Location: caribbean winter, Durango,CO summer
Boat: Nordhavn 5740
Posts: 455
Images: 4
I vote for velcro also, worked well on our boat. try to avoid holes in the bulkhead;the next owner (i know you are NEVER going to sell your baby) will thank you.
gbanker is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need Beneteau Bulkhead Info SouthernComfort Monohull Sailboats 3 10-02-2023 06:54
bulkhead tabbing Dman Construction, Maintenance & Refit 4 27-09-2012 12:39
Internal Bulkhead - How to Finish? David_Old_Jersey Construction, Maintenance & Refit 13 12-07-2009 10:25
Fastening pictures, objects to wood bulkhead?? bstreep Construction, Maintenance & Refit 4 29-10-2008 11:52
hanging in fl. dyvealot Meets & Greets 8 18-04-2008 03:55

Advertise Here


All times are GMT -7. The time now is 22:06.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.