LED bulb conversions, USB chargers, 12v TV and router

[ns423]

For reference as I try to optimize power consumption. I have been replacing light bulbs with LEDs and this is a list of the bulbs I used, they have been tested and do not interfere with the VHF radio. The USB chargers work off the 12V system and can be turned on and off individually. TV's and router run off the 12V system. I shouldn't need to use the inverter unless I use the microwave.

All light fixtures, Warm White Light Lamps, 1.5W Need to trim plastic nub off top of bulb to fit ceiling light fixtures of a 2005 Beneteau 423.

https://www.amazon.com/gp/product/B07FNLVFNM

Red Courtesy lights .24W
https://www.amazon.com/gp/product/B07Y1MB966

Dual socket USB chargers (12V system)
https://www.amazon.com/gp/product/B07SPV944G

TV's (12V system) Free Signal TV Transit 32"
32" Salon, 49W - wide viewing angle from all of salon. USB port on TV will power a Raspberry Pi 3 B+ computer, I have mine set to display OpenCPN, Instruments or stream video.
https://www.amazon.com/gp/product/B07CBSGR5F

Stateroom, limited viewing angle, had to get a mount to tilt the screen down. Milanix 14" Portable Digital TV Battery Powered LED HD Television
https://www.amazon.com/gp/product/B00WRO2VPO

Router - 5v Power from USB Port, advanced features like bridging marina WiFi and advanced firewall controls. GL.iNet GL-AR750S-Ext Gigabit Travel Router
https://www.amazon.com/gp/product/B07GBXMBQF