Quote:
Originally Posted by senormechanico
They wanted to improve a few things with the HC 33 All tanks could be removed if necessary for repair, replacement or access to hull.
The cabin sole panels came up, the table unbolted with four bolts and you could lift both water tanks out after removing a couple of hold down ss crossbeams.
The access hatches were about ten inches in diameter.
The diesel tank was under the aft berth and was also removable through the companionway door.
The engine/trans assembly was also removable through the companionway door without any drama or cutting.
The rudder (airfoil section, not barn door) is designed to be neutrally bouyant so it doesn't add helm while heeling, and is protected with a skeg
|
Since all of these things also apply to the HC34, though not a modified copy design, but an original by Bob Perry, along with the deletion of cable
steering and I've already said your woodwork is prettier, what are you arguing about? I've replaced engine/transmission, by just removing
dodger and putting
engine cover on dining table, very undramatic, took one day to exchange.
Fuel tank was in same place (which I've increased to 40 gal), along with another in lazarette. I believe you're arguing apples and oranges, a HC34, a HC33, or a LN35 are only related by country of manufacture...nothing else.