Cruisers Forum
 

Go Back   Cruisers & Sailing Forums > The Fleet > Monohull Sailboats
Cruiser Wiki Click Here to Login
Register Vendors FAQ Community Calendar Today's Posts Log in

Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 17-05-2013, 08:47   #1
Registered User

Join Date: May 2012
Location: Baltimore, MD
Boat: Cal 2-27
Posts: 843
force 10 different on west marine vs the force 10 site

how important do you think gimballed is vs fixes?



West marine shows the photo with a wooden handle
FORCE 10 Two-Burner Gourmet Galley Gimbaled Propane Ranges at West Marine


force 10 shows a metal handle and a different looking stove
FORCE 10 - Cooking Without Compromise - Products

I found what It was looking for....Defender has the stove with the metal handle.

Force 10 2-Burner North American Standard Propane Gas Stove With Oven

Anyone got any thoughts or opinions, I'm ordering the gimballed, but just wanted opinions regarding gimballed vs fixed
__________________
76% of statistics are made up.
boatsail is offline   Reply With Quote
Old 17-05-2013, 09:23   #2
Senior Cruiser
 
skipmac's Avatar

Cruisers Forum Supporter

Join Date: Oct 2007
Location: 29° 49.16’ N 82° 25.82’ W
Boat: Pearson 422
Posts: 16,306
Re: force 10 different on west marine vs the force 10 site

If you will never use the stove while underway and always anchor in a totally calm harbor with no wakes then the fixed version is fine.

Otherwise get the gimbaled version.
__________________
The water is always bluer on the other side of the ocean.
Sometimes it's necessary to state the obvious for the benefit of the oblivious.
Rust is the poor man's Loctite.
skipmac is offline   Reply With Quote
Old 17-05-2013, 09:29   #3
Moderator
 
Seaworthy Lass's Avatar

Cruisers Forum Supporter

Join Date: Oct 2008
Boat: Bestevaer 49
Posts: 16,151
Re: force 10 different on west marine vs the force 10 site

Quote:
Originally Posted by boatsail View Post
how important do you think gimballed is vs fixes?
......
Anyone got any thoughts or opinions, I'm ordering the gimballed, but just wanted opinions regarding gimballed vs fixed
I think it is essential not only underway if you want to heat anything, but it is also important occasionally in rough anchorages or when exposed to wakes.

It only makes a difference though if your stove is fitted in a fore-aft orientation .
__________________
SWL (enthusiastic amateur)
"To me the simple act of tying a knot is an adventure in unlimited space." Clifford Ashley
"The cure for anything is salt water: sweat, tears or the sea." Isak Dinesen

Unveiling Bullseye strops for low friction rings
Seaworthy Lass is offline   Reply With Quote
Old 17-05-2013, 09:53   #4
Registered User
 
Cheechako's Avatar

Join Date: Aug 2006
Location: Skagit City, WA
Posts: 25,524
Re: force 10 different on west marine vs the force 10 site

Rarely used the gimbal. Never was into cooking a complicated meal at sea though. If you are making major crossings then probably should have it. Deep pans and good retainers will do it. The stove swinging has problems of it's own at times.
The theory seems to be that you just stay on a nice stable heel at sea, of course the water is mostly flat... haha. The reality is the boat is rolling, swinging and bashing through waves.... and the gimbaled stove that is not latched securely is swinging wildly.
__________________
"I spent most of my money on Booze, Broads and Boats. The rest I wasted" - Elmore Leonard











Cheechako is offline   Reply With Quote
Old 17-05-2013, 09:57   #5
Registered User
 
Capt Phil's Avatar

Join Date: Jun 2010
Location: Gig Harbor, WA
Boat: Prior boats: Transpac 49; DeFever 54
Posts: 2,874
Re: force 10 different on west marine vs the force 10 site

Fixed mounts are for 'dock queens', gimballed if you want to leave the dock, cruise or are in a rolly anchorage IMO. Phil
Capt Phil is offline   Reply With Quote
Old 17-05-2013, 11:38   #6
Registered User

Join Date: May 2012
Location: Baltimore, MD
Boat: Cal 2-27
Posts: 843
Re: force 10 different on west marine vs the force 10 site

My bail out date is in october this year. Don't want to be at my dock after that. If I am still at my dock, it means I'm still working! And I don't want to be working when I can be sailing with a gimballed stove flying about all over the place;-)
__________________
76% of statistics are made up.
boatsail is offline   Reply With Quote
Old 17-05-2013, 11:44   #7
Registered User
 
Capt Phil's Avatar

Join Date: Jun 2010
Location: Gig Harbor, WA
Boat: Prior boats: Transpac 49; DeFever 54
Posts: 2,874
Re: force 10 different on west marine vs the force 10 site

Not sure the stove, if properly installed, will be flying about but the kettle sitting on it heating a cup of tea will securely be boiling away regardless of the tack you happen to be on. I worked on commercial vessels with a fixed cast iron stove as well as gimballed stoves on 1000's of miles of cruising... I'd take the gimballed stove on any vessel under 60 feet. Phil
Capt Phil is offline   Reply With Quote
Old 17-05-2013, 12:13   #8
Moderator
 
Seaworthy Lass's Avatar

Cruisers Forum Supporter

Join Date: Oct 2008
Boat: Bestevaer 49
Posts: 16,151
Re: force 10 different on west marine vs the force 10 site

Quote:
Originally Posted by Cheechako View Post
The theory seems to be that you just stay on a nice stable heel at sea, of course the water is mostly flat... haha. The reality is the boat is rolling, swinging and bashing through waves.... and the gimbaled stove that is not latched securely is swinging wildly.
The gimballing compensates beautifully for the rolling and swinging. Unless going directly to windward there is little bashing. And the stove is not actually swinging, the boat is . So the items on the stove top stay relatively stable .

The only problem is if the oven door is opened the system is suddenly unbalanced and anything in the oven and on the stove top will tip. A LOT of care needs to be taken if the oven door is opened while the stove is gimballed.
__________________
SWL (enthusiastic amateur)
"To me the simple act of tying a knot is an adventure in unlimited space." Clifford Ashley
"The cure for anything is salt water: sweat, tears or the sea." Isak Dinesen

Unveiling Bullseye strops for low friction rings
Seaworthy Lass is offline   Reply With Quote
Old 17-05-2013, 12:21   #9
Registered User
 
Capt Phil's Avatar

Join Date: Jun 2010
Location: Gig Harbor, WA
Boat: Prior boats: Transpac 49; DeFever 54
Posts: 2,874
Re: force 10 different on west marine vs the force 10 site

Great point, Seaworthy'... I'd forgotten about the oven door. You're dead right, it throws the whole balance off and compromises the effect of gimballing. I believe Force 10 has a latch or locking mechanism on it, does it not? I know they used to. They had a really impressive fabrication facility in Richmond, BC I toured years ago... not sure it is still there but the guys and women working there took a real pride in their work and product. Phil
Capt Phil is offline   Reply With Quote
Old 17-05-2013, 12:26   #10
Moderator
 
Seaworthy Lass's Avatar

Cruisers Forum Supporter

Join Date: Oct 2008
Boat: Bestevaer 49
Posts: 16,151
Re: force 10 different on west marine vs the force 10 site

Quote:
Originally Posted by Capt Phil View Post
Great point, Seaworthy'... I'd forgotten about the oven door. You're dead right, it throws the whole balance off and compromises the effect of gimballing. I believe Force 10 has a latch or locking mechanism on it, does it not? I know they used to. They had a really impressive fabrication facility in Richmond, BC I toured years ago... not sure it is still there but the guys and women working there took a real pride in their work and product. Phil
I would think most ovens would have a mechanism to lock them when the gimballing is not needed (ours does).

I had hot scones in my lap once opening the oven door while underway with the stove gimballed in my early days cruising. You don't make the same mistake twice LOL .
__________________
SWL (enthusiastic amateur)
"To me the simple act of tying a knot is an adventure in unlimited space." Clifford Ashley
"The cure for anything is salt water: sweat, tears or the sea." Isak Dinesen

Unveiling Bullseye strops for low friction rings
Seaworthy Lass is offline   Reply With Quote
Old 17-05-2013, 12:32   #11
Registered User
 
Capt Phil's Avatar

Join Date: Jun 2010
Location: Gig Harbor, WA
Boat: Prior boats: Transpac 49; DeFever 54
Posts: 2,874
Re: force 10 different on west marine vs the force 10 site

Good reason not wear a bikini when cooking underway! Cheers, Phil
Capt Phil is offline   Reply With Quote
Old 17-05-2013, 12:35   #12
Moderator
 
Seaworthy Lass's Avatar

Cruisers Forum Supporter

Join Date: Oct 2008
Boat: Bestevaer 49
Posts: 16,151
Re: force 10 different on west marine vs the force 10 site

Quote:
Originally Posted by Capt Phil View Post
Good reason not wear a bikini when cooking underway! Cheers, Phil
Was I supposed to be wearing something? Now you tell me!
__________________
SWL (enthusiastic amateur)
"To me the simple act of tying a knot is an adventure in unlimited space." Clifford Ashley
"The cure for anything is salt water: sweat, tears or the sea." Isak Dinesen

Unveiling Bullseye strops for low friction rings
Seaworthy Lass is offline   Reply With Quote
Old 17-05-2013, 13:20   #13
Registered User
 
Capt Phil's Avatar

Join Date: Jun 2010
Location: Gig Harbor, WA
Boat: Prior boats: Transpac 49; DeFever 54
Posts: 2,874
Re: force 10 different on west marine vs the force 10 site

+1! Phil
Capt Phil is offline   Reply With Quote
Old 17-05-2013, 16:17   #14
Moderator Emeritus
 
Paul Elliott's Avatar

Cruisers Forum Supporter

Join Date: Sep 2006
Posts: 4,663
Images: 4
Re: force 10 different on west marine vs the force 10 site

I agree with those who like the gimbals. We've cooked a lot of meals in some pretty wild seas, and the Force 10 stove balances really well. The stove comes with pot-clamps, which also help. There is a locking pin for when you want the stove to be secured.

One thing I've discovered, is that the stove becomes top-heavy if you have (for example) a big pot of spaghetti boiling over a burner. For a while I would throw a hammer and my bag of wrenches in the oven as a counterweight, but eventually I found some heavy scrap steel bars that I secured to the bottom of the stove. No more spilled spaghetti!
__________________
Paul Elliott, S/V VALIS - Pacific Seacraft 44 #16 - Friday Harbor, WA
www.sailvalis.com
Paul Elliott is offline   Reply With Quote
Old 17-05-2013, 18:09   #15
Registered User

Join Date: Nov 2011
Location: Montegut LA.
Boat: Now we need to get her to Louisiana !! she's ours
Posts: 3,421
Re: force 10 different on west marine vs the force 10 site

Ya beat me to it ! an added weight on the bottom of a gimbled stove really helps in the rough stuff! For the reason Paul Elliot above speaks about !! As far as a stove Flinging about on it's gimbles. most of us have a stop on the gimble set up, to lock it in place when not in use. Im suprised your stove don't have something!! I sapose if your not into cooking at sea, then an ungimbled stove would work, but we try to eat at least one hot meal aday, no matter what the weather! and as Capt Phil said, after years of oil fired stationary stoves, we would never have a sailing mono hull without a gimbled stove!! we like to eat !! But then we do have a gimbeld single burner stove for those REALLY BAD Days Just our 2 cents
__________________
Bob and Connie
bobconnie is offline   Reply With Quote
Reply

Tags
marine


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Advertise Here


All times are GMT -7. The time now is 07:26.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.