For Sale: Raymarine s100 remote controller

[Eddie]

works good,with manual.$200.00

[thebootlegger]

Do you know if this is compatible with a SmartPilot ST 6002? If so I would be interested. Thank You. Bootlegger


Sent from my iPad using Cruisers Sailing Forum

[transmitterdan]

I am not the OP but the remote is compatible if the AP is on a Seatalk-1 network. The remote uses Seatalk-1 to communicate with the AP and other instruments.

Seatalk-1 is the simple 3-wire interface Raymarine used for many years. I believe all ST style instruments have it.

[thebootlegger]

Thank you so much...I am going to check and see if we are on seatalk 1.

[transmitterdan]

There are mainly 2 types of connections for Seatalk-1. One is a plastic 3 terminal connector with a curved shape. Also, some connections are made with wires in screw or spring terminals. Typical wire colors are red (+12), black (ground) and yellow (data).

[Zack S]

ST6002 is SeaTalk 1 only, but someone should ask if the "RF base" is included first as its not pictured. That part wires to the SeaTalk network and without it, the remote is not going to work with anything.

[transmitterdan]

Originally Posted by Zack S

ST6002 is SeaTalk 1 only, but someone should ask if the "RF base" is included first as its not pictured. That part wires to the SeaTalk network and without it, the remote is not going to work with anything.

You are right. The RF base unit must be present for the wireless remote to work. The base unit looks like this:

[thebootlegger]

Originally Posted by transmitterdan

I am not the OP but the remote is compatible if the AP is on a Seatalk-1 network. The remote uses Seatalk-1 to communicate with the AP and other instruments.

Seatalk-1 is the simple 3-wire interface Raymarine used for many years. I believe all ST style instruments have it.

Thanks TransmitterDan for the info. We appreciate it.

[thebootlegger]

Originally Posted by Zack S

ST6002 is SeaTalk 1 only, but someone should ask if the "RF base" is included first as its not pictured. That part wires to the SeaTalk network and without it, the remote is not going to work with anything.

Zack thanks for the information and time. We appreciate it.

[thebootlegger]

Originally Posted by Eddie

works good,with manual.$200.00

Does the RF base come with this? If it doesn't I will not be able to use it. Thank you.