Cruisers Forum
 

Go Back   Cruisers & Sailing Forums > Seamanship, Navigation & Boat Handling > OpenCPN
Reload this Page Crashing in Ubuntu
Cruiser Wiki Click Here to Login
Register Vendors FAQ Community Calendar Today's Posts Log in

Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 20-02-2024, 20:13   #1
Marine Service Provider
 
Emmalina's Avatar

Join Date: Jan 2012
Location: Thailand
Boat: Herreshoff Caribbean 50
Posts: 1,096
Crashing in Ubuntu
I have Ubuntu 22.04 and upgraded to 5.8.4 was working last season no problems. This week tried it again and it came up OK but kept crashing when I tried to zoom out. Uninstalled it and removed the folder and reinstalled. Came up working all ok till I installed the maps then started crashing every time i tried to open it. Tried the flatpack version same problem. Only thing I have done to change the system is updating to Ubuntu pro !. Please give me some pointers.. I have attached the logfile Thanks all
Attached Files
File Type: doc opencpn.doc (14.5 KB, 28 views)
__________________
Steve .. It was the last one that did this !
Emmalina is offline   Reply With Quote
Old 21-02-2024, 00:14   #2
Registered User

Join Date: Feb 2012
Posts: 8
Re: Crashing in Ubuntu
Hi @Emmalina,


I am experiencing the same problem. I have moved the .opencpn folder to let the program create a new config folder, but as soon as I add the CM93 charts, it crashes. I have tried with flatpak package. Does not work neither. The default Ubuntu package seems to works well though (not the PPA), but then I guess I will face issues installing the plugins...


This is my terminal output when running a clean PPA version and installing the charts (-> segmentation fault):


Quote:
vmalep@framework:~$ opencpn
ALSA lib pcm_dsnoop.c:601snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dmix.c:1032snd_pcm_dmix_open) unable to open slave
ALSA lib pcm.c:2664snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear
ALSA lib pcm.c:2664snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe
ALSA lib pcm.c:2664snd_pcm_open_noupdate) Unknown PCM cards.pcm.side
Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
ALSA lib pcm_oss.c:397_snd_pcm_oss_open) Cannot open device /dev/dsp
ALSA lib pcm_oss.c:397_snd_pcm_oss_open) Cannot open device /dev/dsp
ALSA lib confmisc.c:160snd_config_get_card) Invalid field card
ALSA lib pcm_usb_stream.c:482_snd_pcm_usb_stream_open) Invalid card 'card'
ALSA lib confmisc.c:160snd_config_get_card) Invalid field card
ALSA lib pcm_usb_stream.c:482_snd_pcm_usb_stream_open) Invalid card 'card'
ALSA lib pcm_dmix.c:1032snd_pcm_dmix_open) unable to open slave
Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
08:52:56: Debug: Device: 0: HD-Audio Generic: HDMI 0 (hw:0,3)
08:52:56: Debug: Device: 1: HD-Audio Generic: HDMI 1 (hw:0,7)
08:52:56: Debug: Device: 2: HD-Audio Generic: HDMI 2 (hw:0,8)
08:52:56: Debug: Device: 3: HD-Audio Generic: ALC295 Analog (hw:1,0)
08:52:56: Debug: Device: 4: hdmi
08:52:56: Debug: Device: 5: pulse
08:52:56: Debug: Device: 6: default
08:52:56: Debug: Device: 0: HD-Audio Generic: HDMI 0 (hw:0,3)
08:52:56: Debug: Device: 1: HD-Audio Generic: HDMI 1 (hw:0,7)
08:52:56: Debug: Device: 2: HD-Audio Generic: HDMI 2 (hw:0,8)
08:52:56: Debug: Device: 3: HD-Audio Generic: ALC295 Analog (hw:1,0)
08:52:56: Debug: Device: 4: hdmi
08:52:56: Debug: Device: 5: pulse
08:52:56: Debug: Device: 6: default
08:52:56: Debug: Device: 0: HD-Audio Generic: HDMI 0 (hw:0,3)
08:52:56: Debug: Device: 1: HD-Audio Generic: HDMI 1 (hw:0,7)
08:52:56: Debug: Device: 2: HD-Audio Generic: HDMI 2 (hw:0,8)
08:52:56: Debug: Device: 3: HD-Audio Generic: ALC295 Analog (hw:1,0)
08:52:56: Debug: Device: 4: hdmi
08:52:56: Debug: Device: 5: pulse
08:52:56: Debug: Device: 6: default
08:52:56: Debug: Device: 0: HD-Audio Generic: HDMI 0 (hw:0,3)
08:52:56: Debug: Device: 1: HD-Audio Generic: HDMI 1 (hw:0,7)
08:52:56: Debug: Device: 2: HD-Audio Generic: HDMI 2 (hw:0,8)
08:52:56: Debug: Device: 3: HD-Audio Generic: ALC295 Analog (hw:1,0)
08:52:56: Debug: Device: 4: hdmi
08:52:56: Debug: Device: 5: pulse
08:52:56: Debug: Device: 6: default
GLEW init success!nGenerating RSA key...
Generating x509 certificate...
Writing key and certificate to disk...
Success!
Local IPv4 address: 192.168.1.40
Opened 2 sockets for mDNS service
Service mDNS: opencpn-object-control-service.:8000
Hostname: framework
Sending announce

(opencpn:112540): Gtk-CRITICAL **: 08:53:08.471: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar

(opencpn:112540): Gtk-CRITICAL **: 08:53:08.471: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar

(opencpn:112540): Gtk-CRITICAL **: 08:53:12.107: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar

(opencpn:112540): Gtk-CRITICAL **: 08:53:12.107: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar

(opencpn:112540): Gtk-CRITICAL **: 08:53:12.107: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkNotebook

(opencpn:112540): Gtk-WARNING **: 08:53:12.107: Negative content width -2 (allocation 0, extents 1x1) while allocating gadget (node header, owner GtkNotebook)

(opencpn:112540): Gtk-CRITICAL **: 08:53:12.107: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkNotebook

(opencpn:112540): Gtk-CRITICAL **: 08:53:12.107: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar

(opencpn:112540): Gtk-CRITICAL **: 08:53:12.107: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar

(opencpn:112540): Gtk-CRITICAL **: 08:53:12.108: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkNotebook

(opencpn:112540): Gtk-CRITICAL **: 08:53:12.108: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkNotebook

(opencpn:112540): Gtk-CRITICAL **: 08:53:12.108: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkNotebook
SENC: nCPU: 16 m_max_jobs :15
Segmentation fault (core dumped)
vmalep is offline   Reply With Quote
Old 22-02-2024, 11:22   #3
Marine Service Provider
 
Emmalina's Avatar

Join Date: Jan 2012
Location: Thailand
Boat: Herreshoff Caribbean 50
Posts: 1,096
Re: Crashing in Ubuntu
I have returned to the 5.6 version so all is well.
__________________
Steve .. It was the last one that did this !
Emmalina is offline   Reply With Quote
Old 22-02-2024, 11:31   #4
Registered User

Join Date: Feb 2010
Location: Tierra del Fuego
Boat: Phantom 19
Posts: 6,212
Re: Crashing in Ubuntu
What graphic card do you have? AMD?
nohal is offline   Reply With Quote
Old 23-02-2024, 11:57   #5
Marine Service Provider
 
Emmalina's Avatar

Join Date: Jan 2012
Location: Thailand
Boat: Herreshoff Caribbean 50
Posts: 1,096
Re: Crashing in Ubuntu
Quote:
Originally Posted by nohal View Post
What graphic card do you have? AMD?

This



But it was fine before the update ???


RENOIR (renoir, LLVM 15.0.7, DRM 3.54, 6.5.0-18-generic
__________________
Steve .. It was the last one that did this !
Emmalina is offline   Reply With Quote
Old 23-02-2024, 12:01   #6
Registered User

Join Date: Feb 2010
Location: Tierra del Fuego
Boat: Phantom 19
Posts: 6,212
Re: Crashing in Ubuntu
There seems to be a bug in the Mesa radeonsi driver that OpenCPN 5.8 and newer triggers. Tracked in https://github.com/OpenCPN/OpenCPN/issues/2889
nohal is offline   Reply With Quote
Reply

« Tides for Malaysia and Indonesia | change name OPENCPN and version to custom name and logo »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
OpenCPN 3.0.2 Keeps on Crashing George64 OpenCPN 13 23-09-2012 20:41
Opencpn crashing. tillybobs Navigation 15 15-07-2012 09:26
MaxSea v 11 Crashing Problems Jim Cate Navigation 20 13-11-2011 10:31
Some Crashing Problems on XP jimbim OpenCPN 8 26-01-2011 03:46
Boom came crashing down while sailing!! Need help please! Amigo Deck hardware: Rigging, Sails & Hoisting 8 27-08-2008 12:04

Advertise Here


All times are GMT -7. The time now is 00:40.

Contact Us - Cruisers & Sailing Forums - Sitemap - Community Rules - Terms of Service - Privacy - Accessibility - Top

Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
close

Privacy Guaranteed - your email is never shared with anyone, opt out any time.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.