Speedseal

[roberttigar]

Anyone got a source for the o-rings on these things. I'm down to my last spare for a g-65 pump. Bob

[Copacabana]

Following...

It seems Speedseal is out of business. I hope someone takes over and re-opens to supply customers.

[hoolie]

It's unfortunately a common problem. The o-rings are of course specific to the type of pump and the usual suggestion is to very carefully measure the overall diameter and thickness then look on-line for generic o-ring suppliers.

[Jim Cate]

On my SS the o-ring is of very small cross section, and I was unable to find a replacement here on the east coast of Oz. The SS is on my spare pump, so I gave up looking some time back. If anyone does find a source, I'd be glad to know of it.

Jim

[1affiah]

How about this?

https://www.amazon.com/Splicing-Kit-...%2C191&sr=8-19

[FPNC]

O-rings are as generic as can be. Measure the cross section of the o-ring and the inside diameter. These measurements can be taken from the groove on the pump cover. Order online from a half dozen suppliers in SAE or Metric. I have used allorings.com. O-rings can have tolerances of up to 10%.