For Sale: 20 gal water/waste tank polypropylene

[osirissail]

Polypropylene Tank - 20 gallon - $75.00
I have a 20 gal polypropylene tank which can be used as either a potable water tank (that what I used it for before upgrading to a larger tank) or possibly a waste/holding tank.
It measures 14-1/2" by 11-1/2" and 28" long. Vents and fill/drain are all on one end. With the large inlet positioned up you would have a potable water tank. With the large inlet positioned at the bottom you would have a waste/holding tank.
Biggest consideration is, of course, the size / dimensions. Where are you going to put the tank, for instance. So the above dimensions - 14.5" x 11.5" x 28" will determine if it will fit your application. Don't forget to allow space off the end for hoses to be connected.

[N4RNV]

Location?

[osirissail]

We are here in Florida at Cape Canaveral / Port Canaveral. It is at the eastern end of SR 528 "The BeachLine" which runs from Orlando (& the airport) all the way to Cape Canaveral / Cocoa Beach / Titusville. This the place where they shoot off all those big space rockets - vibrates our boat every time one goes up. Luckily they don't blow up that often - that really scares our cat right off the keyboard.

[osirissail]

** Explanation or what we are listing ***
I have failed to mention enough times that ALL of the stuff we are listing is from our boat and has been collected over the years when I could sail and cruise. My terminal cancer has ended all of that so we are trying to find a good home for the stuff. Since quite a bit of it is "old" and no longer available or made, we thought cruisers might be interested - especially if you had one and now would like to replace your broken one with an exact or near duplicate.

If you do buy something from us and it is not what you expected, then return it using the same postal system we used to get it to you and we will fully refund your money plus the cost of the return postage.