Cruisers Forum
 


Join CruisersForum Today

Closed Thread
 
Thread Tools Rate Thread Display Modes
Old 09-06-2010, 15:48   #781
oem
Registered User

Join Date: Nov 2009
Location: Vejle, Denmark
Boat: Vindø 995 ds
Posts: 133
Quote:
Originally Posted by bdbcat View Post
OEM...

Thanks for the input.

I need to see one of the charts that causes the indicated logfile entries, and also the config file that produces a no-start condition.

Thanks
Dave
Chart from 1. logfile below is here: http://dl.dropbox.com/u/5863278/S_157_25000.kap

1. Logfile:
23:27:42: 2010-06-09
23:27:42: -------Starting opencpn-------
23:27:42: Version 2.1.0 Build RC607a
23:27:42: SData_Locn is C:\Program Files\OpenCPN\
23:27:42: Using existing Config_File: C:\Users\oem\AppData\Roaming\opencpn\opencpn.ini
23:27:42: Setting Viewpoint Lat/Lon 55.6751, 9.6914
23:27:42: Setting Ownship Lat/Lon 55.7016, 9.6309
23:27:42: System default Language: da_DK
23:27:42: Opencpn language set to: da_DK
23:27:42: Using s57data in C:\Program Files\OpenCPN\s57data
23:27:42: Using Tide/Current data from: C:\Program Files\OpenCPN\tcdata\
23:27:42: Setting Viewpoint Lat/Lon 55.6751, 9.6914
23:27:42: Setting Ownship Lat/Lon 55.7016, 9.6309
23:27:42: NMEA Data Source is....Serial:AIS Port (Shared)
23:27:42: AIS Data Source is....None
23:27:42: Using WVSChart datafile: C:\Program Files\OpenCPN\wvsdata\wvs43.dat
23:27:42: NMEA AutoPilot Port is....None
23:27:42: Loading chart db version: V016
23:27:42: Chart directory D:\data\Drabant 22\søkort\OpenCPN\kms
23:27:42: GPS Watchdog Timeout is: 6 sec.
23:27:42: Initializing Chart D:\data\Drabant 22\søkort\OpenCPN\kms\S_157_25000.kap
23:27:42: Initializing Chart D:\data\Drabant 22\søkort\OpenCPN\kms\SK_BRJNG.kap
23:27:42: Initializing Chart D:\data\Drabant 22\søkort\OpenCPN\kms\S_114_75000.kap
23:27:42: Initializing Chart D:\data\Drabant 22\søkort\OpenCPN\kms\S_103_200000.kap
23:27:43: Initializing Chart D:\data\Drabant 22\søkort\OpenCPN\kms\S_F_850000.kap
23:27:43: Initializing Chart D:\data\Drabant 22\søkort\OpenCPN\kms\S_C_850000.kap
23:27:46: Initializing Chart D:\data\Drabant 22\søkort\OpenCPN\kms\S_151_75000.kap
23:27:46: VP Final Check: Georeference Chart_Error_Factor on chart D:\data\Drabant 22\søkort\OpenCPN\kms\S_151_75000.kap is 1
23:27:46: Trying again with internally calculated georef solution
23:27:46: Result: OK, Internal georef solution used.
23:29:17:



Logfile from 'no-start'-problem immediately following above logfile. Ini-file attached.

2. logfile
23:29:17: 2010-06-09
23:29:17: -------Starting opencpn-------
23:29:17: Version 2.1.0 Build RC607a
23:29:17: SData_Locn is C:\Program Files\OpenCPN\
23:29:17: Using existing Config_File: C:\Users\oem\AppData\Roaming\opencpn\opencpn.ini
23:29:17: Setting Viewpoint Lat/Lon 55.6751, 9.6914
23:29:17: Setting Ownship Lat/Lon 55.7016, 9.6309
23:29:17: System default Language: da_DK
23:29:17: Opencpn language set to: da_DK
23:29:17: Using s57data in C:\Program Files\OpenCPN\s57data
23:29:17: Using Tide/Current data from: C:\Program Files\OpenCPN\tcdata\
23:29:17: Setting Viewpoint Lat/Lon 55.6751, 9.6914
23:29:17: Setting Ownship Lat/Lon 55.7016, 9.6309
23:29:17: NMEA Data Source is....Serial:AIS Port (Shared)
23:29:17: AIS Data Source is....None
23:29:17: Using WVSChart datafile: C:\Program Files\OpenCPN\wvsdata\wvs43.dat
23:29:17: NMEA AutoPilot Port is....None
23:29:18: Loading chart db version: V016
23:29:18: Chart directory D:\data\Drabant 22\søkort\OpenCPN\kms
23:29:18: GPS Watchdog Timeout is: 6 sec.
23:29:18: Initializing Chart D:\data\Drabant 22\søkort\OpenCPN\kms\S_157_25000.kap
23:29:18: VP Final Check: Georeference Chart_Error_Factor on chart D:\data\Drabant 22\søkort\OpenCPN\kms\S_157_25000.kap is 1.00006
23:29:18: Trying again with internally calculated georef solution
23:29:18: Result: OK, Internal georef solution used.

Thanks..
Attached Files
File Type: doc opencpn.ini.doc (3.8 KB, 26 views)
__________________

__________________
oem is offline  
Old 09-06-2010, 17:27   #782
Registered User

Join Date: Mar 2010
Location: Normandy, France
Boat: Flush Poker, 8.25m (Point Barre)
Posts: 335
GRIB Navigate(2)

Sorry, there's a bug in the first version. Selecting another file did not change ComboBox content. I also changed a few options on the file selection dialog.

Enjoy!
Attached Files
File Type: doc opencpn-gribbrowse.diff.doc (25.6 KB, 23 views)
__________________

__________________
SethDart is offline  
Old 09-06-2010, 20:37   #783
Marine Service Provider
 
bdbcat's Avatar

Join Date: Mar 2008
Posts: 4,883
Ptizef/JP....

I cannot reproduce your problem with course-up, look ahead mode in post #758.
Any more information? Anyone else seen this? Can someone try to simulate this. It works fine for me....

Thanks
Dave
__________________
bdbcat is online now  
Old 09-06-2010, 21:08   #784
Registered User

Join Date: Oct 2009
Location: Lelystad, The Netherlands
Boat: vd Stadt 44, Ben the Boat
Posts: 195
Quote:
1. Some of this chart folio has internal errors which opencpn has not seen before, producing crashes.
Dave,

Can you let me know some more about these errors in the charts? You can code around these problems but I can also contact the organisation and let them solve these problems. These charts are a test for us but also for them

Bart
__________________
champ8242 is offline  
Old 10-06-2010, 01:26   #785
Registered User

Join Date: Sep 2009
Location: Angers - France
Boat: Beneteau First 29 Ptizef
Posts: 743
Hi Dave

'Send to GPS'
I tried with my Garmin 152 . Everything seams normal , I get progress bars etc... but nothing
arrive in the GPS
Regards
Jean Pierre
__________________
Ptizef is offline  
Old 10-06-2010, 01:51   #786
Registered User

Join Date: Feb 2010
Location: On the go. Not in Prague.
Posts: 4,016
Quote:
Originally Posted by Ptizef View Post
I tried with my Garmin 152 . Everything seams normal , I get progress bars etc... but nothing arrive in the GPS
Exactly the same result when I dug my 276C out of the dust... And a hang and later crash on exit... Will try to debug it a little bit later today. Looks like MapSource is not the only Garmin product which is a bit crappy

Pavel
__________________
nohal is offline  
Old 10-06-2010, 06:08   #787
Registered User

Join Date: Aug 2009
Posts: 183
Ptizef,

I get exactly the same, but Dave have said he will have a look for this problem with Garmin GPS. It should be the same problem.

I think that 152 is the new GPS that has followed 126/128. You cannot find 126 and 128 anymore. Most of functions are quite the same.
I am not too much surprise to learn that "Sent to GPS" is not also working with 152
While waiting I think you use, like me, something like gebabbel.

Jean-Pierre
__________________
jpiebrig is offline  
Old 10-06-2010, 08:13   #788
Marine Service Provider
 
bdbcat's Avatar

Join Date: Mar 2008
Posts: 4,883
jp...

Will you tell me how you use gpsbabel to successfully send routes to garmin? This may give me some hints.....

Thanks
Dave
__________________
bdbcat is online now  
Old 10-06-2010, 09:41   #789
Registered User

Join Date: Sep 2009
Location: Angers - France
Boat: Beneteau First 29 Ptizef
Posts: 743
Dave , Jean Pierre

I think there bis a small confusion by saying not working with Garmin 152
Last year with the old versions 1.3 .... (I don't remember exactly , Dave is going too fast) I used many times this function and it worked , but only for way points , not for routes . I mean that opencpn was able to send all the way points of the route but not the route itself . It was not a complete function but enough for what I was expecting.
We had discussed about that and if I understood well the data sheet , 152 accepts only the entry sentence WPL
But what I am saying now is that the 210-607 don't send anything to the GPS which is a "regression"
best regards
Jean Pierre
__________________
Ptizef is offline  
Old 10-06-2010, 10:37   #790
Marine Service Provider
 
bdbcat's Avatar

Join Date: Mar 2008
Posts: 4,883
Ptizef....

Are you sure that NOTHING is sent to the GPS? Or is something sent, but wrong format? Do you have any way to check this, maybe by null modem loopback?

Also, do you have a version of 1.3.... which works for WPL?

Thanks

Dave
__________________
bdbcat is online now  
Old 10-06-2010, 10:51   #791
Registered User

Join Date: Sep 2009
Location: Angers - France
Boat: Beneteau First 29 Ptizef
Posts: 743
Dave

I am very sorry ! My mistake !
My GPS is connected via my AIS device ... so no return to GPS !
If I connect directly all way points of the route are sent to my 152 as before (only route is not created)
Please excuse me .
Regards
Jean Pierre
__________________
Ptizef is offline  
Old 10-06-2010, 11:53   #792
Registered User

Join Date: Dec 2005
Location: WNA
Boat: Dufour 35
Posts: 3,248
oem's chart problems

Quote:
23:29:18: Initializing Chart D:\data\Drabant 22\søkort\OpenCPN\kms\S_157_25000.kap
23:29:18: VP Final Check: Georeference Chart_Error_Factor on chart D:\data\Drabant 22\søkort\OpenCPN\kms\S_157_25000.kap is 1.00006
23:29:18: Trying again with internally calculated georef solution
23:29:18: Result: OK, Internal georef solution used.
The strange thing is that I have none of this in my log-file after loading this chart. I cannot repeat the problem.
I might just be a problem with the word "søkort" in the path. Try to rename this directory so it does not contain the letter "ø", or similar, and test again.

Thomas
__________________
cagney is offline  
Old 10-06-2010, 12:51   #793
Registered User

Join Date: Sep 2009
Location: Angers - France
Boat: Beneteau First 29 Ptizef
Posts: 743
Quote:
Originally Posted by bdbcat View Post
I cannot reproduce your problem with course-up, look ahead mode in post #758.
Any more information? Anyone else seen this? Can someone try to simulate this. It works fine for me....
Dave ,
I had this problem in navigation and just had time to take shots
Now I tried to simulate but didn't succeed to reproduce
Sorry , I'll be watchful on my next sailing (If the Brittany weather permits it ! )
Regards
Jean Pierre
__________________
Ptizef is offline  
Old 10-06-2010, 13:20   #794
oem
Registered User

Join Date: Nov 2009
Location: Vejle, Denmark
Boat: Vindø 995 ds
Posts: 133
Quote:
Originally Posted by cagney View Post
The strange thing is that I have none of this in my log-file after loading this chart. I cannot repeat the problem.
I might just be a problem with the word "søkort" in the path. Try to rename this directory so it does not contain the letter "ø", or similar, and test again.

Thomas
I think the chart has to be loaded together with other charts, so that quilting takes place. But the problem is not consistent, thats the biggest issue.

Concerning the letter 'ø', I can remember a number of releases back, where that was a problem, but I think it has been corrected long ago. But of course, - I will continue identifying where the problem is, so I will try to make a new folder also.

Thanks for the help anyway..

Please remember that the chart is copyrighted.
__________________
oem is offline  
Old 10-06-2010, 15:19   #795
Registered User

Join Date: Mar 2010
Location: Normandy, France
Boat: Flush Poker, 8.25m (Point Barre)
Posts: 335
AIS Target List Dialog

Hi OpenCPNers,

Here is the last one : AIS Taget List Dialog

You can reach it in the right button menu, just under Route Manager menu item.

The content is refreshed every 5 seconds. Only tested with manimaul's AISReplay so far (BTW thanks a lot for that one)

Enjoy!
Attached Thumbnails
Click image for larger version

Name:	opencpn-aistargetlistdialog.png
Views:	76
Size:	59.0 KB
ID:	16895  
Attached Files
File Type: doc opencpn-aistargetlistdialog.diff.doc (13.3 KB, 28 views)
__________________

__________________
SethDart is offline  
Closed Thread

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
OpenCPN Version 1.3.5 Beta Technical bdbcat OpenCPN 544 24-03-2010 11:34
OpenCPN Version 1.3.6 Release bdbcat OpenCPN 32 30-01-2010 06:07



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 21:52.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.