For Sale: EWOL Feathering 3 Blade Propeller 15" RH, 1"SAE

[Paradox111]

Thank you for sharing

Originally Posted by fstbttms

Well, the bottom line is that props for shafts cannot be used on saildrives and props for saildrives cannot be used on shafts. Ewol (and most other prop manufacturers) sell props designed to be used on both, but they are different items and are not interchangeable. Which is why I got into this thread in the first place. Your initial post indicated that you had a prop of a type that I had never encountered before.

[Paradox111]

This prop is still available.

[Tor_Ghibli]

Afternoon Paradox ... last message was February ... it is still available? I will have to swim under the boat to confirm some details, but it may be just what I seek.

[Paradox111]

Originally Posted by Tor_Ghibli

Afternoon Paradox ... last message was February ... it is still available? I will have to swim under the boat to confirm some details, but it may be just what I seek.

YES, this prop is still available.

[Tor_Ghibli]

I will be back on the boat Friday and will swim under to check my specs.

I will be in touch if the technical fit requirements are met. I wil then hope to negotiate a bit from there.

Be well ...

[Tor_Ghibli]

Hello Paradox111,

I indeed have a 1" shaft, but a 17" diameter 3-wing prop. Yours is only 15", and while that translates into only 1" shorter on each blade, I am concerned that I will not have the thrust to which I am accustomed, or adequate for the weight of the boat (13,000 lbs.)

I will do some more research

[kenbo]

If you are satisfied with your 17" prop and can reach rated engine rpm the 15" will be underpowered even if you set the pitch higher.

[Tor_Ghibli]

Thanks Kenbo,

That's my fear. I do not technically "need" a feathering prop (does anyone??), but believe that with it, I may be able to keep up with my friend who evidently has a slightly faster boat ... !

But, I have to find the right one.

What is the likelihood that my 17" is actually too big and 15" is the right size? Seems that there are variances with the gearing ratios too, so, a few moving parts I am trying to understand.

Thanks,

Hamish

[Tor_Ghibli]

Originally Posted by Paradox111

This prop is still available.

Hi Paradox, it seems the consensus is that 15" will be inadequate. Sorry to lead you on. It might work for potential buyers to know ahead of time what your target market is: <34', less than 10,000 lbs, etc (those numbers are made up ...).

[Paradox111]

Thank you for researching Hamish,

For anyone with a smaller boat try this propeller calculator:
https://www.vicprop.com/displacement_size.php

[m3sailor]

Hi Paradox,

Just checking in to see the current status of the prop. Thanks.

[Paradox111]

Still available, I apologize for the late response.

[Paradox111]

SOLD american