Interfacing Yanmar 3YM30AE to NMEA2000

[B4A]

Has anyone successfully connected their Yanmar 3YM30AE engines to NMEA2000 in order to be able to display oil temp and pressure and coolant temp using EM2000 by MBW Technologies?


They claim their EM2000 Product (EIM) is designed as a Plug ‘N’ Play NMEA 2000 engine monitoring gateway for Yanmar Mechanical Engines.

The EM2000 converts the data and alarms from your analog engine to the NMEA 2000 protocol.

The engine information can then be viewed on any NMEA 2000 compliant multifunction display.

The EM2000 is fully compatible with the Yanmar B panel and can be installed at the helm or in the engine room.

No additional wiring is needed because the EM2000 plugs directly into your Yanmar engine harness, BUT you need to get the oil and coolant senders that the 3YM30AE doesn't have. They sell a kit for that.


image uploader

[Mixman1]

Following this one. Let me know if you try it and what success you have.

[B4A]

Well unfortunately MBW Technologies just come back to me saying they discontinued the product.

Here is a list of other companies that may have something for the Yanmar 3YM30:

- Actisense EMU-1 engine monitoring unit
http://www.actisense.com/product/emu-1/



- LXNAV SmartEMU
https://marine.lxnav.com/products/smartemu/



- Noland RS-11
https://www.nolandeng.com/rs11.php



- Maretron EMS100
https://www.maretron.com/products/ems100.php