Borg Warner Velvet drive oil pressure?

[Tomac]

Hello to all,
I have series 1000, 10-23-004 transmission which had oil leek, which manifested as occasional losing od power. Before solving oil leek issue, oil pressure in transmission was around 116psi when run cold, or round 72psi when transmission got hot. After solving the leakage , pressure is now 72psi cold , or 67 hot, which is reasonable. Only problem is that I can't find any data on what should be oil pressure to start with. Maybe there is still some problems with transmission I cannot see now while on work desk, and I would recheck everything before returning it to boat.

Thanks in advance!
Tomislav

[skipperpete]

[ATTACH]264725

[Tomac]

Thank you very much!