450: L450 DC bus bar and breakers

[dcareri]

Hi,

I have a 2015 L450 and I want to add a few more 12 volt circuit breakers. Does anyone know the manufacturer of the 12V bus bar and those little breakers. I looked on the Beneteau spare parts site with no luck. Nothing written on the breakers other than "made in Germany"

lagoon 450 breaker.JPG Views: 180 Size: 65.6 KB ID: 134623" style="margin: 2px" />

Thanks
Dennis

[boom23]

Search for "resettable blade fuse" in amazon.com or ebay. There are many manufacturers.

You can also use a standard automotive blade fuse.

[dcareri]

Thanks, I'm also looking for the fixture/socket which attached to the bus bar. Hopefully I'll find that where I find the breakers.

[jbinbi]

E-T-A Circuit Protection and Control - 1170-22-10A - Blade Snap Vol-Rtg 28VDC 1 Pole Plug-In Cur-Rtg 10A Push Therm Circuit Breaker - Allied Electronics

there is also a -21 model, I am not sure i remember the difference. they come in different Amps, i got -22 -10/15/20. inexpensive enough to get a few of them.

[dcareri]

Thanks for the pointers. Allied also has the fuse housing to expand the current buss for more fuses.

[jbinbi]

If you have a link for this, it would be great. I didn't see that.

[dcareri]

There are three versions of the breaker holder. One with a screw connection on both sides, one with push tabs on both sides, and one with acscrew end and a push tab. I think my 450 has screws on both sides but won't be back to the boat until next weekend to verify. Here's the link...

E-T-A Circuit Protection and Control - 12-J20 - 6-32 UNC Screw Terminal Single Socket Mounting Socket Accessory - Allied Electronics