Originally Posted by Giannisailing
Hello fellow Lagoon 440
I have a Raymarine
ray 55E and I want to fit the second unit on the Flybridge. My question is how and where do pass the cable connecting the main unit to the one on the flybridge.
I've taken off many of the panels
of trying to figure out the obvious path but without much success.
Have any of you done this! could you enlighten me?
I do not know the complete path but here is the begining:
1. from under the chart table to below the mast
2. from there is a PVC tube (that is right in the middle of the boat) going back to the cockpit
locker. You need to remove the wooden panel port side of the cockpit
3. from there up to wheel
. You need to remove the fiberglass
panel that is right above the cockpit locker, next to the saloon
For the last meter I would try to remove the first ceiling panel at the entrance of the saloon
, I guess this one leads to the electronics
. Please let me know :-)