Free: Boom - 14'

[delmarrey]

I have this old Sparcraft boom that I pulled of my boat. It needs new paint and has a small crack on the weld for the clevis at the gooseneck. But an EZ weld, and there's a little bit of corrosion but nothing to compromise a rebuild. A good sand blasting and new paint and it would be like new.

It'll take up to a 14' sail-foot or could be cut down to accommodate a shorter sail. The foot is set up for a boltrope or slugs. The clew traveller is on rollers. It's 14'-10-1/4" from the cross pin to the clew end. And 7-1/2" high x 4-1/4" wide.

You pay for the trucking and it's yours. Otherwise it's going to get cut up for scrap aluminum. I'll give this post 30 days.

BTW it's not bent, just a distortion in the pictures.

.

[Anomaly]

PM sent.

[delmarrey]

Actually, it was email but I've just replied.

[delmarrey]

The boom is gone now! The post can be removed/deleted.
Thanks!