Pb with export route in .gpx

[Lithops]

Good morning,

I have a problem with exporting routes to .gpx files in OpenCPN, only on Linux, under W11 it's good. I have version 5.8.4. Under W11 the file starts with and ends with the waypoints inside. Under Linux it starts with a then, continues with then when the route is finished?
Attached the two files.

[nohal]

I am affraid I do not understand the description of what you consider to be the problem, please try to rephrase it.
Both the attached files are perfectly valid GPX. testGPX_W11.gpx contains one route and nothing else.
testGPX.gpx contains one waypoint, one route and two tracks, so it is kind of hard to deduce what you think is the problem with it.
Certainly it is not the same data as in the first file.

[Lithops]

Yes the file .gpx is correct, butI want to have a route with waypoints, the W11 version is correct, the Linux version is made from the same points Wt0, Wt1, Wt2, Wt0. why are the two .gpx files different ?

[nohal]

The route contained in the "wrong" file is comprised of four points. They are not the same points as in the other file, is that your problem?
Or is your problem that the file testGPX.gpx also contains the waypoint and tracks?

If the later, are you sure you exported only the route and not all the data you have on the system (= Are you sure you clicked on the right button) as depicted on the attached screenshot?