Simrad CP33

[Paul Carey]

The Simrad CP 33 plotter fitted to our Catalac 8m works well & drives our Raymarine ST3000 autopilot without problem . I have downloaded the manual ref 02181.11 & section 10.1 shows the currently unused 7 pin socket marked depth as also being able to receive inputs for wind , sea temp .speed & log. There is no info in manual as to what spec sensors are needed for these functions , nor the industry standard type of plug ...I contacted simradtech@navico.com & their man ; Pablo has come back being as helpfull as he can be , but points out that the manual was last updated > 20 years ago !!! ,,he also suggests that only the CE plotters ran depth using a 170kHz transducer ,,,Is there anyone out there with ancient knowledge on how to get our plotter working on all functions ?