Cruisers Forum
 


Join CruisersForum Today

Paul Elliott has been thanked many timesPaul Elliott has been thanked many times

Paul Elliott Paul Elliott is offline

Moderator

Profile Comments

Showing Profile Comments 1 to 4 of 4
  1. Smokeys Kitchen
    A quick update - I did connect everything up and it seemed to work fine. I did not transmit from the ram mic though - kind of waiting to hear if you have anything to say.

    It was the case that when I spoke to ICOM about this situation they told me it would not work. It was too late in the day for me to call the SH tech support; I'll ask them on Monday
  2. Smokeys Kitchen
    Thanks in advance,

    Ron Risden
  3. Smokeys Kitchen
    Hello Paul. Since I have seen you write about electrical stuff on the forum I was wondering if you would be willing to try to answer a question for me regarding ram mics and cable connections?

    Basically my M504 went out and I am replacing it with a SH GX2200. I also got a ram mic for the SH, but in my attempt not to have to run the new remote cable, I just tried plugging the existing ICOM cable into the back of the radio. It looks to be a "standard" 8 pin, and it fit fine. I could also plug the SH ram mic into the ICOM socket on the steering pedestal. Is there any reason I need to use a proprietary cable for the ram mic? I realize the colors may not line up with the mfgr. list - but since there is a placement "detent" in each of the connections I am assuming that the electrical transmissions (mike, volume, DSC and AIS stuff, etc) would flow into the correct receptacle for the ram mic.

    Am I nuts?
  4. YPSILANTI
    Thank you Paul. Typed IAS in haste. Appreciated.

About Me

  • Signature
    Paul Elliott, S/V VALIS - Pacific Seacraft 44 #16 - Friday Harbor, WA
    www.sailvalis.com

Statistics

Total Posts
Albums
Profile Comments
General Information
  • Last Activity: Yesterday 13:31
  • Join Date: 15-09-2006
  • Referrals: 0

Friends

Showing Friends 1 to 6 of 6


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 18:23.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.