Trim for smaller replacement portlights

[Paul L]

Originally Posted by bmax242

i don't recommend glue as if you need to remove the trim for any reason it is a hassle there are sealers u can use 3m 5200/5300 or silicone screws work well ...also the abs has different finishes for different looks. A little sandpaper can help to smooth the edge if you do not get a smooth cut.
cheers all

It depends on what you are doing with it. I used it to cover a full side section like you would with teak veneer. In this case a glue is the choice. 5200 is a very mean glue and a messy over kill for these panels.

[AbelCMann]

I spent 43,000 hours over twenty-four years building movie sets, mostly on location and the rule is that if you can"t hide it, feature it. All kinds of elegant treatments can be done - have fun with it!

[SeaSon]

White electrical tape, 1 inch wide works well for purely cosmetic trim. Works well for years even if regularly wet.

Sent from my SAMSUNG-SGH-I537 using Cruisers Sailing Forum mobile app