Raymarine autopilot fault

[Gos2017]

Hi all
Just replaced all the seals in my Lecomble and Schmitt hydraulic ram (driven by a Raymarine ST6001). Bled the system and reinstalled in the boat.
Now, when in Auto, if I press +10 or -10 the helm just moves back and forth from port to Stbd and won't settle. If sitting in Auto and the boat moves off course a bit the helm moves back and forth as well.

Any ideas?? It was working fine before, just had a bit of a leak.

Cheers
Gos

[Jim Cate]

Sounds like there's still some air in the system, so additional bleeding might well be in order.

Jim

[Gos2017]

Originally Posted by Jim Cate

Sounds like there's still some air in the system, so additional bleeding might well be in order.

Jim

Thanks for the reply Jim. I'll give it a go.

Cheers