Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Rate Thread Display Modes
Old 28-01-2007, 05:26   #46
Registered User

Join Date: Aug 2006
Location: cairns australia
Boat: now floating easy37
Posts: 636
Images: 41
and damn it i have to go back to work tomorrow as school starts doesnt that suck
sean
__________________

__________________
northerncat is offline   Reply With Quote
Old 28-01-2007, 15:28   #47
Registered User
 
cat man do's Avatar

Join Date: Aug 2006
Location: Brisbane Australia [until the boats launched]
Boat: 50ft powercat, light,long and low powered
Posts: 4,409
Images: 36
Quote:
Originally Posted by northerncat
how do you get bog to go around tight radiuses smoothly, it just keeps dragging and im thinking of just waiting till im ready to high build open to ideas??

also how soon do you guys leave it to set before you start sanding and what is the longest you leave it before you consider it to be cocncrete
sean
Smaller batches,Runnier brew, almost pourable like mayo.

I mix no more than about 600ml at a time and get it out of the container and on the boat fast.

I've got 2 year old bog that sand's just fine with sharp 36 grit on a torture board.

Qcel and hi-build fills the scratches easily.

Dave
__________________

__________________
"Money can't buy you happiness but it can buy you a yacht large enough to pull up right alongside it"...............David Lee Roth
Long Distance Motorboat Cruising It Is Possible on a Small Budget
cat man do is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to "seal" a cast iron keel? speedoo Construction, Maintenance & Refit 4 04-04-2007 20:11
Depth Sounder Installation Steve Kidson Marine Electronics 1 12-06-2006 05:25
Keel-Hull Joint Fairing GordMay Construction, Maintenance & Refit 1 04-05-2003 13:23



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 07:27.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.