wore out in the motor
of my old Crosby open-frame refrigerator's condensing unit and I have not been able to locate replacements
. Any help would be appreciated.
are not the usual rectangular ones that press radially against a cylindrical commutator. Rather they are trapezoidal in cross section and press axially (from the rear) against a spoke-like commutator.
The brushes I seek are for an American Bosch 1/4HP (maybe 1/3HP) motor
marked: 10778-24-MO48HM 12V. The brush cross section is trapezoidal with dimensions 4.7mm (at narrow end of trapezoid), 7mm (at wide end), 12.9mm (between narrow and wide ends) and about 12 mm height with wires moulded in.
Any idea where I could find these? Thanks, Floyd 2sailors(at)verizon.net