Nexus autopilot error

[Tjurd]

Hi guys,

As soon as i turn my autopilot on my nexus network wont goes balistic.

My current setup:
Nexus nx2 server
Nexus nx2 instruments
Nexus gps
Nexus HPC Compass
Nexus autopilot

Compas is hooked up to the server
Server is hooked up to the autopilot

When i turn on the server all instruments function fine, autopilot control also works, but autopilot itself is not yet turned on.

As soon as i power up to autopilot brains all instruments one by one go blank and say: press button to reintialise (to give them a network id)

The autopilot instrument loses its compass heading, angle of rudder does work and eventualy also goes blank.

I get error 02 and error 25

System was working fine, while back we did have a battery low voltage.

[Tjurd]

Little bump, maybe still some Nexus NX2 nerds out there [emoji846]

[Tjurd]

For future search, hereby an update:

I sent the autopilot computer and instrument to a Nexus/ Garmin expert in Germany. After testing they concluded in German:

Bemerkungen zum Problem
1 St. Nexus NX2 Autopilot Anzeige ; AAZ00266 1 St. Nexus Servo A1510 ; D300494 -------------------------------------------- Überprüfung
- an der Anzeige wurde kein Fehler festgestellt,
- der Servo hat keine Funktion ; keine Online Anzeige auf der PCB dadurch Error Meldung 03;02;38 ; - defekt Teile U7,U11,U1
- Servo ist nicht mehr Reparabel, und es gibt auch kein Ersatz mehr, ------------------------------------------

In other words, the servo computer is broken and can not be serviced.

I bought a new Garmin Autopilot.