Looking for matching hawse pipe

snorskyp · 10-07-2008, 00:05

I'm looking for triangular hawse pipe (the guide that your mooring lines go through).
I am unable to find one to match the one I have. It is stainless and has flanges on only the 2 sides which are 90 degrees to each other. These 2 flanges are about 1" to 1 1/2" wide and have the screw holes in them to screw the hawse pipe down to the top of the coaming boards. The pipe rests right in the corner where the gunwale meets the transom - if anyone has any ideas where I can find this animal - I'd sure appreciate it.

Thanks - Paul S.

**GMac** · 10-07-2008, 01:34

I'd say that if it was an old fitting you maybe out of luck. Many of the older manufacturers of things like that have been rolled by china who only do a limited range.

You may have to get someone to make one for you.

Any idea of the age?

And by the way, a welcome to CF is in order by the looks. There are many from all corners of the world here so you just never know who maybe watching and know.

**GordMay** · 10-07-2008, 04:03

WELCOME Aboard Paul.

A Google on < triangular hawse pipe . Will produce lots of results:

Perko Triangular Hawse Hole Plate # 0755
Goto: PERKO Inc.

Sea-Dog #328180
http://www.sea-dog.com/PDF/328180.pdf

Hawse Deck Pipes, Triangular, 316 Stainless Steel, Precision Cast

Whitecap # 6349
Goto: Whitecap - Hawse Pipes

snorskyp · 11-07-2008, 14:53

I checked the Sea Dog and white cap triangular ones - no luck.

I'm having my local Carver dealer check too. Next option is to visit a few used marine supply warehouses - there are several in Seattle which are pretty good.

**GMac** · 11-07-2008, 20:24

Just a thought.
Down here we have a few shops which do trade-ins and deal in some second hand gear. They often have hard to find older fittings off whatever.

Anyone like that around your area maybe? They often know of someone who knows someone sort of thing as well.

Whimsical · 12-07-2008, 08:05

Is it fabricated or cast. If cast a good foundry should be able to reproduce it or a fabrication shop if fabricated.

Mike

10-07-2008, 00:05	#1
snorskyp Registered User Join Date: Jul 2008 Location: Seattle, WA Boat: Carver, Convertible 32 - Willie the Shoe Posts: 2	Looking for matching hawse pipe I'm looking for triangular hawse pipe (the guide that your mooring lines go through). I am unable to find one to match the one I have. It is stainless and has flanges on only the 2 sides which are 90 degrees to each other. These 2 flanges are about 1" to 1 1/2" wide and have the screw holes in them to screw the hawse pipe down to the top of the coaming boards. The pipe rests right in the corner where the gunwale meets the transom - if anyone has any ideas where I can find this animal - I'd sure appreciate it. Thanks - Paul S.

11-07-2008, 14:53	#4
snorskyp Registered User Join Date: Jul 2008 Location: Seattle, WA Boat: Carver, Convertible 32 - Willie the Shoe Posts: 2	No luck yet on Hawse Pipe I checked the Sea Dog and white cap triangular ones - no luck. I'm having my local Carver dealer check too. Next option is to visit a few used marine supply warehouses - there are several in Seattle which are pretty good.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Exhaust Pipe Thread Sealer	Raven	Engines and Propulsion Systems	8	20-05-2008 21:59
mix and matching different epoxies	northerncat	Construction, Maintenance & Refit	7	06-05-2008 01:25
Matching prop to engine	Weyalan	Engines and Propulsion Systems	15	19-03-2008 10:19
hawse-pipe - Gurus, need your advice	vacendak	Anchoring & Mooring	47	28-01-2008 19:22
New Member...pipe dream?	jkirstein	Meets & Greets	22	30-04-2007 08:07

10-07-2008, 01:34	#2
GMac Moderator Site Helper Join Date: Oct 2005 Location: North of the Bridge, thankfully Boat: R930 Posts: 1,177	I'd say that if it was an old fitting you maybe out of luck. Many of the older manufacturers of things like that have been rolled by china who only do a limited range. You may have to get someone to make one for you. Any idea of the age? And by the way, a welcome to CF is in order by the looks. There are many from all corners of the world here so you just never know who maybe watching and know.

10-07-2008, 04:03	#3
GordMay Administrator Site Administrator Join Date: Mar 2003 Location: Thunder Bay, Ontario - 48-29N x 89-20W Boat: C.L.O.D. (Cruiser Living On Dirt) Posts: 9,728 Images: 232	WELCOME Aboard Paul. A Google on < triangular hawse pipe . Will produce lots of results: Perko Triangular Hawse Hole Plate # 0755 Goto: PERKO Inc. Sea-Dog #328180 http://www.sea-dog.com/PDF/328180.pdf Hawse Deck Pipes, Triangular, 316 Stainless Steel, Precision Cast Whitecap # 6349 Goto: Whitecap - Hawse Pipes __________________ Gord May ~~_/)_~~ (Gord & Maggie - "Southbound") "If you didn't have time/$ to do it right in the first place, when will you get the time/$ to fix it?"

11-07-2008, 20:24	#5
GMac Moderator Site Helper Join Date: Oct 2005 Location: North of the Bridge, thankfully Boat: R930 Posts: 1,177	Just a thought. Down here we have a few shops which do trade-ins and deal in some second hand gear. They often have hard to find older fittings off whatever. Anyone like that around your area maybe? They often know of someone who knows someone sort of thing as well.

12-07-2008, 08:05	#6
Whimsical Registered User Join Date: Jan 2007 Location: Fremantle Australia Boat: Schioning 12.3 "Wilderness" Bi-Rig under construction Posts: 515	Is it fabricated or cast. If cast a good foundry should be able to reproduce it or a fabrication shop if fabricated. Mike