Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 09-03-2012, 13:20   #1
Registered User
 
svtatoosh's Avatar

Join Date: Aug 2011
Location: Astoria
Boat: Alajuela 38
Posts: 106
Spreader repair

The stainless fastners and cap shrouds have pitted my aluminum spreaders quite a bit. After sanding them down to good metal, will the corrosion stop when I isolate the cap wire and the fasterners from the spreaders? Aesthetics not a real concern and I'm assuming that the electrolysis will cease when I separate the stainless from the aluminum.

Thanks!
Tom in Astoria
svtatoosh is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Spinnaker Pole Repair kbudd Deck hardware: Rigging, Sails & Hoisting 21 13-03-2012 12:35
Raymarine Linear Drive - Repair or Replace? Capt.Don Marine Electronics 21 01-03-2012 18:47
Rudder Repair trapoc Construction, Maintenance & Refit 2 25-02-2012 17:59
Potential impediments to using diesel engine repair skills while cruising Team Ryer Boat Ownership & Making a Living 15 24-02-2012 15:32
Major Mast Step Repair - Please Advise gixerjen Construction, Maintenance & Refit 55 16-02-2012 14:55

Advertise Here


All times are GMT -7. The time now is 14:24.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.