[SOLD] 20 Yds Vectorply 26.24oz Fiberglass Cloth $140

[rsvmille]

Pickup Oriental, NC.

Defender Marine Price is
$10.99 ($9.38 Defender 1st) per yard = $219.88 ($187.60) before taxes and shipping.

Composites One Vectorply Non-Woven Fiberglass Cloth

Weight: 26.24 Ounce, Made by Stitching (2) 9 Ounce Layers
Thickness: 0.043", Width: 50"
High Performance, Production Grade Laminate Reinforcement





Features:

Vectorply non-woven fabric is the latest in high performance, production grade laminate reinforcements
Provides:
Higher strength to weight
Better drape and mold conformity
Faster wet out
Smoother laminate finish
Higher glass to resin ratio
Double bias vectorply is made of fibers closely packed in parallel lines at 45 Degrees to the center axis and then stitch bonded to 3/4 oz. strand mat for rapid wet out and fast buildup
Yields a 15% increase in tensile and flexural strength with no increase in weight
In structures where maximum loads do not occur along or perpendicular to the center axis, vectorply can be laid aligned with the center axis, and the resulting orientation of the fibers at 45deg. Resists high torsion stress
VLX1708 is 26.24 oz./sq. yd.
Suitable where lighter weight and better drape are needed, or to add strength along the 45deg. axes
Thickness .043
Width - 50"
Material:

This fabric has (2) 9.07 oz layers and a 8.1 oz chopped mat for a total weight of 26.24 oz/square yd.
The chopped mat is layed down first and then one 9.07 oz layer is layed down at a -45 degree angle
The other 9.07oz layer is layed down at +45 degree.
The Fabric is then stich bonded together to produce a product that is 26.24oz/sq yd.

[Chotu]

Not ideal for epoxy. Perfect for polyester. Just in case any beginners are looking at buying.

[Benz]

My price on this from Comp One just jumped by 17%
If anyone needs this, snap it up while you can.