SO 40.3 - Yanmar 4JH3E engine interface to NMEA2000

[Nettuno]

Hi,

I have a Yanmar 4JH3E with the simple control panel (only tachometer, alarms and then a gauge with engine hours and another with fuel level) and I'd like to connect engine data to a Raymarine multidisplay I have available to read NMEA Data like:

• Engine Hours
• Engine RPM
• Oil Pressure
• Oil Temperature
• Coolant Pressure
• Coolant Temperature
• Percent engine load
• Battery voltage and current
• Alternator potential and current
• Total Fuel vol
• Total Fuel %
• Fuel rate

With those data and my Multifunction Display then I'll be able to setup:

• Est. Fuel Remaining
• Fuel Used (Trip)
• Distance To Empty
• Time to Empty
• Engine and transmission warnings and alarms


I'm thinking to add a Engine Gateway YDEG-04 from Yacht Devices: yachtdevicesus.com/products/engine-gateway-ydeg-04 with the Yanmar adapter cable: yachtdevicesus.com/products/adapter-cables-for-ydeg-04-engine-gateways

Anybody knows if the Engine transmit all those data by default? I should add additional Engine sensors to allow the engine to transmit all this data?