gear box and prop shaft - couplings not meeting?
clutch was slipping.
lifted
engine, removed
gearbox
took to the mechanics.
repaired
bolted
engine and
gearbox back together
lowered onto engine mounts
And now there is a gap : 1+1/2 inch ( 40mm )
between the coupling on the
gear box
and the coupling on the Prop shaft
see
photo
That obviously was not there before.
Have 'tapped' the prop coupling lightly with a hammer.
No obvious movement.
there is a nut sticking out of the bottom of that prop shaft coupling
I can feel it, but not see it
(
photo attached )
looking for suggestions / comments / help