Hi Moogli
I went for the Flexofold 3 bladed 2 x 16” diameter 3bladed Flex O Fold to suit
Saildrive. This is the description from the invoice:
16x12 LH 3 bladed ,
Saildrive Flex O Fold
They felt bit and heavy (and expensive) compared to the old
2 blade folding prop I had on my previous 21 HP Nanni's - but seemed to
work fine.
I went for the rope-cutters - which were good and think saved us a couple of times - but a bit or a pain as regular anodes need to be modified (I think you could get away with just drilling a hole in them if you had to.
Also with this set up you can't use the split anode for in
water anode changes.
Otherwise was good - 5 years of cruising from
Turkey to NZ and no problems. good luck