Builders plate and HIN mounting location Seawind 1000

[geoffq1]

Good morning, does anyone know where Seawind mounted the builders plate and located the HIN number on Seawind 1000 vessels.
I have a 2000 version and can not find where these are located and require this information for Australian registration.
I do have the HIN number (from the previous owner in the bill of sale document) but as I say do not have where it is located on the vessel.
Thanks for your help.

[fxykty]

Originally Posted by geoffq1

Good morning, does anyone know where Seawind mounted the builders plate and located the HIN number on Seawind 1000 vessels.

I have a 2000 version and can not find where these are located and require this information for Australian registration.

I do have the HIN number (from the previous owner in the bill of sale document) but as I say do not have where it is located on the vessel.

Thanks for your help.

https://www.dol.wa.gov/forms/420739.pdf

HIN should be located on the outside of the starboard hull, high up near the gunnel or hull/deck joint, close to the stern.

Builder’s plate should be visible in the cockpit, probably located near the floor on the salon bulkhead or somewhere near there. The carrying capacity for various conditions (does Seawind use the European CE A,B,C,D system for loading?) should be shown on the builder’s plate.