For Sale: Teak BowSprit

[deesgrp]

I have a solid teak Bowsprit if anyone needs one for a rehab project on a boat that needs one like this. Please see pics for size. If no one needs it I plan to make a bench out of it but would rather see it back on a boat. Contact info: Deesgrp@gmail.com. Thanks, Gene

[Badsanta]

I cant read the numbers. Could you state the size. Thanks

Sent from my SPH-L710 using Cruisers Sailing Forum mobile app

[Oregon Waterman]

Originally Posted by Badsanta

I cant read the numbers. Could you state the size. Thanks

Sent from my SPH-L710 using Cruisers Sailing Forum mobile app

Looks like 5 feet plus and 8 inches by 8 inches. Has to be heavy.

[skipmac]

Might have a use for it in my refit. Are you in the USA? East coast?

[deesgrp]

Originally Posted by skipmac

Might have a use for it in my refit. Are you in the USA? East coast?

Florida panhandle in Carrabelle.

[deesgrp]

Originally Posted by Badsanta

I cant read the numbers. Could you state the size. Thanks

Sent from my SPH-L710 using Cruisers Sailing Forum mobile app

Okie Dokie Badsanta, here are the measurements: 67 1/2 inches long including the smaller part where it connects to the boat; 12 1/2 inches wide at the widest part; 9 1/2 inches at the most narrow part; the part where it connects to the boat is 5 1/4 inch wide; it is 4 inches thick at the thickest part and 1 1/2 inch thick at the thinnest part (bow). Hope this helps... FYI for everyone... This Bowsprit came off a Cheoy Lee... Thanks,, Gene

[Badsanta]

Thanks. But To far to pick up.

Sent from my SPH-L710 using Cruisers Sailing Forum mobile app