Visit our Popular Forums

RonRock · 13-10-2013, 17:23

I see quite a few adds looking for Sailrite machines, so I figured I'd through this up and see if anyone can use it. Feels kind of out of place with the high rollin boat adds and such but maybe worth a shot.

Anyway I have an early version Monster Wheel to sell. For the machine that had a clutch drive rather than the new Posi Pin. I bought it on Ebay before I bought my LSZ-1 and the seller was not so kind as to mention that it is for the earlier model. So I have this and would like to recoup my money. It is in new condition, I think it was never used. Can't remember his ad.

I'd like to get $70.00 plus shipping.

Thanks,
Ron

[http://s562.photobucket.com/user/Ron...6a23.jpg.html]

Cape Charters · 23-10-2013, 18:17

Ron, Does the wheel come with the handle, timing belt and hardware to install?
Thanks, Dave

RonRock · 24-10-2013, 03:59

I can include the handle from my new version. The belt is the same as original.

Thanks,
Ron

sailr69 · 24-10-2013, 14:17

I have the Thompson /sailrite pw 200. you think this wheel will work on this? if so I will buy it from you.

RonRock · 25-10-2013, 05:36

Quote:

Originally Posted by sailr69

I have the Thompson /sailrite pw 200. you think this wheel will work on this? if so I will buy it from you.

Here is the reply I got from Sailrite forum,

Quote:

The only Thompson/Sailrite machine was the 301 model. It will work on that model. I don't think our wheel will fit the 200 series older Thompson machines. I believe a portion of the body casting and the bobbin winder get in the way. Pretty sure the bobbin winder wheel on the 201 sits vertically and engages the side of the wheel instead of the face which is the biggest issue.

So unless you have the 301 model it don't look like it will work.

Thank you for the interest.

Ron