For Sale: PDQ 36 Cat w 3' Hull Ext Refit 2016 - Ft. Pierce Florida

[kitehawaii]

Malolo is a Bahama/World-ready cruiser, designed for speed, and long-term live aboard comfort. Her 3’ shoal draft and easy to handle sail plan make it a go anywhere, FUN, boat. If your plans are to coastal cruise, club race or an extended trip into the Caribbean Sea on a budget this is your boat. She has the sought after three cabin one head layout. The remodeled galley with stainless counters and shelving is down offering large prep areas and safety for the cook.

Much attention has been paid to functional storage that doubles as seating. The Davit system includes a Hammock back bench. The storage room has storage shelves the fold out into additional sleeping quarters. The main salon has triple configuration with storage/bed, storage and or open seating.

The battery banks were recently doubled with over 400 amp hours of AGM batteries, 690watts of Solar was added with a floating panel that can be articulated for morning or evening solar exposure. The fuel capacity 65 gallons. Cockpit function and comfort was also greatly enhanced with the addition of a custom extra long dock box/bench with cushions and hammock back for comfort and safety. Includes twin Yamaha high thrust motors and a full motor spare on board. She also features heavy duty hinged 3’ Hull Extensions that can be folded up if needed. Head sails are on new Colligo continuous furler. Genoa, Jib and a fully battened main, and a 325 sf. Spinnaker. Brand new synthetic rigging in 2014. Synthetic life lines. New Raymarine Autopilot, Chart Plotter and Wireless Quantum Radar.

There is a virtual tour located at
http://360cruisers.com/2016/09/29/19...apella-malolo/

By email kevin@malolo.tv

By phone 808-283-3578

Boat located in Ft. Pierce, Florida

Hull & Deck:
White Gel Coat Deck
3' Hull Extensions on Hinge which can be Lifted or Removed
Electric Windlass
Fortress Bow anchor: Fortress 37 with 180ft rode & chain
New Composite and Stainless Radar arch with Catchment & Dingy Davits
Aft Boarding platform with shower connections
Bimini Canvas
Bottom Pain Recently Applied
Custom SUP/Surfboard Rack
New Dyneema Standing Rigging
New Rear Transom Dockbox Storage Bench with Hammock Back
New Tramp

Mechanical:
Engine: 2 - 2 cyl Yamaha 9.9 4 Stroke High Thrust Outboards and 1 Spare
Engine Hours: Unknown
Fuel Capacity: 65 Gal Gas
Cruising Speed: 7 Knots
Max Speed:9 Knots

Electrical Power:
New 690w of Solar with New Outback Solar Charge Controller
Shore Power 30 amps
New Xantrex Battery Chargera
New Inverter with timer in Galley
New AGM Battery Bank

Electronics:
Raymarine: Multitouch 7" Chart Plotter - SL70C, Autopilot, Wind Speed Indicator, Tridata
VHF Standard Horizon with Remote

Sails & Rigging:
Sloop rig
Recently Inspected
40’ 10" Mast Height
New Continuos Furler
New Sheets
New Custom Engineered Bow Sprit
All lines are lead back to the Helm

Galley:
Stainless Steel Counter Top
Custom Cabinets
2- 40 Gallon Fresh water tanks
2 Burner Stove with Oven
Double sided sink
Large Fridge with new Engel Compressor
Water Heater

Living Quarters:
2 Bunks with Queen Size Bunks and Closets, One smaller double berth/storage
New Interior Fabric for Cushions
New Samsung TV
U shaped salon that converts to additional sleeping bunk
Navigation Station on Starboard side
Head(s):
Aft Head with Standing Shower
Head constructed out of single piece factory mold for easy cleaning
20 Gallon Holding Tank Capacity

Safety:
Emergency Life Sling
Spot PLB

Other:

[svGenesis]

very nice, I'm a big fan of the pdq36 but i'm still almost a year away. I suggest you post many more photo's.

[PhiSig1071]

Did I miss the price?

Could you go into more detail on the hull extensions? Is that a common modification? What is their purpose and how do they accomplish it?

[geoleo]

What year is boat? Was it originally a 32ft oa boat? Where now registered? Is price a secret?

[skipgundlach]

Were we next to you in Riverside while you were doing the extensions?

[kitehawaii]

Hi, The price is $118,000

The hull extensions are built out of g-10 compressed epoxy. They can be folded up and out of the way if a marina is really measuring your boat. They have rub rails on the edges so they won't damage a dingy and you can step right out of the boat onto a large platform instead of a small step.

[kitehawaii]

No, it is a 36' PDQ with 3' hull extensions.

[alansmith]

Nice cat and seems to be a good price for a fully loaded kitty

[thinwater]

Originally Posted by kitehawaii

No, it is a 36' PDQ with 3' hull extensions.

What supports the bottom part? The top is cantilever bolted, I presume, and floats on a rubber strip? Id the bottom part attached to the top part?

[kitehawaii]

That's correct. The canteliver top part is bolted into tapped g10 and under glassed in ledge as well. The bottom is hinged to hull and bolted to top part.

[Sailmonkey]

Originally Posted by kitehawaii

That's correct. The canteliver top part is bolted into tapped g10 and under glassed in ledge as well. The bottom is hinged to hull and bolted to top part.

Do the non bouyant extensions add speed? I can't see them reducing squat unless you're really moving.


Sent from my iPhone using Cruisers Sailing Forum

[PhiSig1071]

They don't look like they'd add much buoyancy, maybe they help prevent hobby horsing by providing resistance against the stern dipping into the water?

I'm very curious about this mod, I'm not sure I really understand the point.

[thinwater]

Swim platforms do add function. As the OP stated, they will make getting out of a dinghy easier. On a cat you park the dinghy alongside the platform, making boarding very easy.

[kitehawaii]

At 5 knots they are planning and reducing rocking motion and increasing speed.

[Sailmonkey]

Originally Posted by kitehawaii

At 5 knots they are planning and reducing rocking motion and increasing speed.

Makes sense.....


Sent from my iPhone using Cruisers Sailing Forum