Cruisers Forum
 


 
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 14-10-2016, 14:22   #1
Registered User

Join Date: Sep 2011
Posts: 28
Send a message via Skype™ to kitehawaii
PDQ 36 Cat w 3' Hull Ext Refit 2016 - Ft. Pierce Florida

Malolo is a Bahama/World-ready cruiser, designed for speed, and long-term live aboard comfort. Her 3 shoal draft and easy to handle sail plan make it a go anywhere, FUN, boat. If your plans are to coastal cruise, club race or an extended trip into the Caribbean Sea on a budget this is your boat. She has the sought after three cabin one head layout. The remodeled galley with stainless counters and shelving is down offering large prep areas and safety for the cook.

Much attention has been paid to functional storage that doubles as seating. The Davit system includes a Hammock back bench. The storage room has storage shelves the fold out into additional sleeping quarters. The main salon has triple configuration with storage/bed, storage and or open seating.

The battery banks were recently doubled with over 400 amp hours of AGM batteries, 690watts of Solar was added with a floating panel that can be articulated for morning or evening solar exposure. The fuel capacity 65 gallons. Cockpit function and comfort was also greatly enhanced with the addition of a custom extra long dock box/bench with cushions and hammock back for comfort and safety. Includes twin Yamaha high thrust motors and a full motor spare on board. She also features heavy duty hinged 3 Hull Extensions that can be folded up if needed. Head sails are on new Colligo continuous furler. Genoa, Jib and a fully battened main, and a 325 sf. Spinnaker. Brand new synthetic rigging in 2014. Synthetic life lines. New Raymarine Autopilot, Chart Plotter and Wireless Quantum Radar.

There is a virtual tour located at
http://360cruisers.com/2016/09/29/19...apella-malolo/

By email kevin@malolo.tv

By phone 808-283-3578

Boat located in Ft. Pierce, Florida

Hull & Deck:
White Gel Coat Deck
3' Hull Extensions on Hinge which can be Lifted or Removed
Electric Windlass
Fortress Bow anchor: Fortress 37 with 180ft rode & chain
New Composite and Stainless Radar arch with Catchment & Dingy Davits
Aft Boarding platform with shower connections
Bimini Canvas
Bottom Pain Recently Applied
Custom SUP/Surfboard Rack
New Dyneema Standing Rigging
New Rear Transom Dockbox Storage Bench with Hammock Back
New Tramp

Mechanical:
Engine: 2 - 2 cyl Yamaha 9.9 4 Stroke High Thrust Outboards and 1 Spare
Engine Hours: Unknown
Fuel Capacity: 65 Gal Gas
Cruising Speed: 7 Knots
Max Speed:9 Knots

Electrical Power:
New 690w of Solar with New Outback Solar Charge Controller
Shore Power 30 amps
New Xantrex Battery Chargera
New Inverter with timer in Galley
New AGM Battery Bank

Electronics:
Raymarine: Multitouch 7" Chart Plotter - SL70C, Autopilot, Wind Speed Indicator, Tridata
VHF Standard Horizon with Remote

Sails & Rigging:
Sloop rig
Recently Inspected
40 10" Mast Height
New Continuos Furler
New Sheets
New Custom Engineered Bow Sprit
All lines are lead back to the Helm

Galley:
Stainless Steel Counter Top
Custom Cabinets
2- 40 Gallon Fresh water tanks
2 Burner Stove with Oven
Double sided sink
Large Fridge with new Engel Compressor
Water Heater

Living Quarters:
2 Bunks with Queen Size Bunks and Closets, One smaller double berth/storage
New Interior Fabric for Cushions
New Samsung TV
U shaped salon that converts to additional sleeping bunk
Navigation Station on Starboard side
Head(s):
Aft Head with Standing Shower
Head constructed out of single piece factory mold for easy cleaning
20 Gallon Holding Tank Capacity

Safety:
Emergency Life Sling
Spot PLB

Other:
Attached Thumbnails
Click image for larger version

Name:	DSCN6241.jpg
Views:	514
Size:	100.2 KB
ID:	132867   Click image for larger version

Name:	DSCN6334.jpg
Views:	480
Size:	84.4 KB
ID:	132868  

Click image for larger version

Name:	DSCN6345.jpg
Views:	485
Size:	97.1 KB
ID:	132869   Click image for larger version

Name:	IMG_0490.JPG
Views:	515
Size:	121.9 KB
ID:	132870  

Click image for larger version

Name:	Hard-IMG_0020.jpg
Views:	500
Size:	116.3 KB
ID:	132871   Click image for larger version

Name:	IMG_0491.JPG
Views:	495
Size:	104.5 KB
ID:	132872  

Click image for larger version

Name:	IMG_0344.jpg
Views:	469
Size:	109.3 KB
ID:	132873   Click image for larger version

Name:	Dock PhotoDSCN6314.jpg
Views:	501
Size:	126.5 KB
ID:	132874  

Click image for larger version

Name:	DSCN6157.jpg
Views:	475
Size:	92.5 KB
ID:	132875   Click image for larger version

Name:	DSCN6341.jpg
Views:	489
Size:	81.1 KB
ID:	132876  

Click image for larger version

Name:	Hull-Ext-IMG_0025.jpg
Views:	551
Size:	143.7 KB
ID:	132877   Click image for larger version

Name:	Pano_sunsetIMG_0383.jpg
Views:	541
Size:	64.3 KB
ID:	132878  

kitehawaii is offline  
Old 14-10-2016, 16:25   #2
Registered User

Join Date: Oct 2014
Location: Texas
Boat: Endeavour 40, Sold, soon to be 38'-44' catamaran
Posts: 185
Re: PDQ 36 Cat w 3' Hull Ext Refit 2016 - Ft. Pierce Florida

very nice, I'm a big fan of the pdq36 but i'm still almost a year away. I suggest you post many more photo's.
svGenesis is offline  
Old 14-10-2016, 16:43   #3
Registered User

Join Date: Nov 2014
Location: Tucson, AZ
Posts: 357
Re: PDQ 36 Cat w 3' Hull Ext Refit 2016 - Ft. Pierce Florida

Did I miss the price?

Could you go into more detail on the hull extensions? Is that a common modification? What is their purpose and how do they accomplish it?
PhiSig1071 is offline  
Old 14-10-2016, 17:35   #4
Registered User

Join Date: Oct 2015
Posts: 1,023
Re: PDQ 36 Cat w 3' Hull Ext Refit 2016 - Ft. Pierce Florida

What year is boat? Was it originally a 32ft oa boat? Where now registered? Is price a secret?
geoleo is offline  
Old 15-10-2016, 08:12   #5
Registered User
 
skipgundlach's Avatar

Join Date: Mar 2003
Location: Currently on the boat, somewhere on the ocean, living the dream
Boat: Morgan 461 S/Y Flying Pig
Posts: 1,994
Send a message via Skype™ to skipgundlach
Re: PDQ 36 Cat w 3' Hull Ext Refit 2016 - Ft. Pierce Florida

Were we next to you in Riverside while you were doing the extensions?
__________________
Morgan 461 #2 SV Flying Pig, KI4MPC
See our galleries at www.justpickone.org/skip/gallery!
skipgundlach is offline  
Old 15-10-2016, 11:04   #6
Registered User

Join Date: Sep 2011
Posts: 28
Send a message via Skype™ to kitehawaii
Re: PDQ 36 Cat w 3' Hull Ext Refit 2016 - Ft. Pierce Florida

Hi, The price is $118,000

The hull extensions are built out of g-10 compressed epoxy. They can be folded up and out of the way if a marina is really measuring your boat. They have rub rails on the edges so they won't damage a dingy and you can step right out of the boat onto a large platform instead of a small step.
Attached Thumbnails
Click image for larger version

Name:	IMG_0154.jpg
Views:	267
Size:	421.6 KB
ID:	132902   Click image for larger version

Name:	IMG_0155.jpg
Views:	280
Size:	418.1 KB
ID:	132903  

Click image for larger version

Name:	IMG_0157.jpg
Views:	285
Size:	404.9 KB
ID:	132904   Click image for larger version

Name:	IMG_0158.jpg
Views:	283
Size:	421.0 KB
ID:	132905  

kitehawaii is offline  
Old 15-10-2016, 11:06   #7
Registered User

Join Date: Sep 2011
Posts: 28
Send a message via Skype™ to kitehawaii
Re: PDQ 36 Cat w 3' Hull Ext Refit 2016 - Ft. Pierce Florida

No, it is a 36' PDQ with 3' hull extensions.
kitehawaii is offline  
Old 16-10-2016, 01:17   #8
Registered User

Join Date: Mar 2015
Location: San Francisco Bay area
Boat: Condor Trimaran 30 foot
Posts: 1,463
Re: PDQ 36 Cat w 3' Hull Ext Refit 2016 - Ft. Pierce Florida

Nice cat and seems to be a good price for a fully loaded kitty
alansmith is offline  
Old 16-10-2016, 04:28   #9
Writing Full-Time Since 2014
 
thinwater's Avatar

Cruisers Forum Supporter

Join Date: Nov 2008
Location: Deale, MD
Boat: PDQ Altair, 32/34
Posts: 7,622
Re: PDQ 36 Cat w 3' Hull Ext Refit 2016 - Ft. Pierce Florida

Quote:
Originally Posted by kitehawaii View Post
No, it is a 36' PDQ with 3' hull extensions.
What supports the bottom part? The top is cantilever bolted, I presume, and floats on a rubber strip? Id the bottom part attached to the top part?
__________________
Gear Testing--Engineering--Sailing
https://sail-delmarva.blogspot.com/
thinwater is offline  
Old 16-10-2016, 06:13   #10
Registered User

Join Date: Sep 2011
Posts: 28
Send a message via Skype™ to kitehawaii
Re: PDQ 36 Cat w 3' Hull Ext Refit 2016 - Ft. Pierce Florida

That's correct. The canteliver top part is bolted into tapped g10 and under glassed in ledge as well. The bottom is hinged to hull and bolted to top part.
kitehawaii is offline  
Old 16-10-2016, 06:49   #11
Registered User
 
Sailmonkey's Avatar

Join Date: Sep 2009
Location: Houston
Boat: '76 Allied Seawind II, 32'
Posts: 8,208
Re: PDQ 36 Cat w 3' Hull Ext Refit 2016 - Ft. Pierce Florida

Quote:
Originally Posted by kitehawaii View Post
That's correct. The canteliver top part is bolted into tapped g10 and under glassed in ledge as well. The bottom is hinged to hull and bolted to top part.

Do the non bouyant extensions add speed? I can't see them reducing squat unless you're really moving.


Sent from my iPhone using Cruisers Sailing Forum
Sailmonkey is offline  
Old 16-10-2016, 08:41   #12
Registered User

Join Date: Nov 2014
Location: Tucson, AZ
Posts: 357
Re: PDQ 36 Cat w 3' Hull Ext Refit 2016 - Ft. Pierce Florida

They don't look like they'd add much buoyancy, maybe they help prevent hobby horsing by providing resistance against the stern dipping into the water?

I'm very curious about this mod, I'm not sure I really understand the point.
PhiSig1071 is offline  
Old 16-10-2016, 08:46   #13
Writing Full-Time Since 2014
 
thinwater's Avatar

Cruisers Forum Supporter

Join Date: Nov 2008
Location: Deale, MD
Boat: PDQ Altair, 32/34
Posts: 7,622
Re: PDQ 36 Cat w 3' Hull Ext Refit 2016 - Ft. Pierce Florida

Swim platforms do add function. As the OP stated, they will make getting out of a dinghy easier. On a cat you park the dinghy alongside the platform, making boarding very easy.
__________________
Gear Testing--Engineering--Sailing
https://sail-delmarva.blogspot.com/
thinwater is offline  
Old 17-10-2016, 07:54   #14
Registered User

Join Date: Sep 2011
Posts: 28
Send a message via Skype™ to kitehawaii
Re: PDQ 36 Cat w 3' Hull Ext Refit 2016 - Ft. Pierce Florida

At 5 knots they are planning and reducing rocking motion and increasing speed.
kitehawaii is offline  
Old 17-10-2016, 07:58   #15
Registered User
 
Sailmonkey's Avatar

Join Date: Sep 2009
Location: Houston
Boat: '76 Allied Seawind II, 32'
Posts: 8,208
Re: PDQ 36 Cat w 3' Hull Ext Refit 2016 - Ft. Pierce Florida

Quote:
Originally Posted by kitehawaii View Post
At 5 knots they are planning and reducing rocking motion and increasing speed.

Makes sense.....


Sent from my iPhone using Cruisers Sailing Forum
Sailmonkey is offline  
 

Tags
florida, hull, pdq, refit

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Alternator Need Ext Regulator? BriRich Electrical: Batteries, Generators & Solar 23 12-11-2014 06:01
30 amp ext cord to 50 amp outlet jerry-rig liveaboardL Electrical: Batteries, Generators & Solar 13 22-07-2014 10:19
want to replace ext. oil line yanmar 2qm20 with copper charliehows Engines and Propulsion Systems 1 24-06-2014 18:47
For Sale: Grundig portable SSB w/ ext entenna SaltyBard Classifieds Archive 3 13-11-2013 06:53
Info on Fort Pierce, Florida, wanted. newlazydays Destinations 4 11-10-2013 08:14

Advertise Here


All times are GMT -7. The time now is 04:46.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.