Visit our Popular Forums

Nemo55 · 02-03-2012, 10:32

Registered Cal 28, its a classic 1968 in need of a little TLC (needs paint inside-new cushion covers-some rigging)
It is stored at my residence in Mission B.C. and can be kept here free of charge to the purchaser until May.
Boat needs an engine, The coupling to drive shaft is in place as is the Folding prop with new zinc.
Has built in ice box, Built in Head, Mast and Boom and Spinnaker. Needs Stove/cooktop, has Exhaust stack for Stove.
Interior needs some cleaning and paint (interior paint flaking) and the cushions need re-upholstering.
comes with Anchor, with rode and chain
Comes with All three sails, Main, Jib etc. anyhow it comes with three different sails.

S&S standing rigging is all there.
Comes with a Sailing Dingy, no mast or sails though.

Cal 28 specs

Hull Type: Fin w/spade rudder Rig Type: Masthead Sloop
LOA: 28.00' / 8.53m LWL: 22.50' / 6.86m
Beam: 9.00' / 2.74m Listed SA: 352 ft2 / 32.7 m2
Draft (max.) 4.50' / 1.37m Draft (min.)
Disp. 6000 lbs./ 2722 kgs. Ballast: 2200 lbs. / 998 kgs.
SA/Disp: 17.11 Bal./Disp.: .37
Designer: C. W. Lapworth
Builder: Jensen Marine (USA)
Construct.: FG Bal. type: Lead
First Built: 1963 Last Built: 1969 # Built: 347
RIG DIMENSIONS KEY
I: 33.00' / 10.06m J: 11.40' / 3.47m
P: 28.00' / 8.53m E: 11.70' / 3.57m
PY: EY:
SPL: ISP:
SA(Fore.): 188.10 ft2 / 17.47 m2 SA(Main): 163.80 ft2 / 15.22 m2
Total(calc.)SA: 351.90 ft2 / 32.69 m2
SA/Disp: 17.10 Est. Forestay Len.: 34.91' / 10.64m

Location: Fraser Valley