Hello, I have spent an inordinate amount of time not getting anywhere with this.
I gather it's a good idea to connect external devices to SignalK, then connect
OpenCpn to that.
I have a little VelaNavega NMEA2WIFI multiplexer. ATM, I have a
Garmin GPS 152 connected to it. The LEDs in the multiplexer flash when the
GPS is on, so I presume it's getting data.
I've entered what I thought was the right info into the SignalK connections page and in
Opencpn. However, I'm not getting anything through.
I would be grateful if someone could advise how I get SignalK connected to the multiplexer, and then pass that data to Opencpn.
I have read n+1 amounts of
documentation and watched many videos - none of it seems to (me) to tell me what I need, but I will freely admit to not being well up on networking and all the serial/usb alchemy that goes on. I'm also at
anchor, with limited
internet.
Many thanks.