Wonder if anyone has had this problem, and can help me before I see how far this unit will bounce off the nearest wall....
Have a 7001 control unit on a Type 2 drive and an s3 computer on a Valiant 40.
The unit would power up and drive the linear drive
, but the screen
was burnt out so I replaced it with one of the ones from eBay.
Went well, screen
powers up nicely on Standby, showing current compass
reading and rudder
position, and also registers changes.
BUT, it wonít respond to any button pushes, no beep and no response, so canít go to auto or any other function.
I have had a long look inside the unit, donít seem to have any issues related to the screen replacement.
Took it to the Ray people, the usual response, the control unit is broken here is a $1000 replacement. The computer and drive worked OK with a spare 6002 head
Does this ring any bells? Any suggestions?