OpenPlotter project

[conachair]

Originally Posted by Alpenskipper

I want to rebroadcast a marina Hotspot, too (V 0.71b, RPI3, second WiFi dongle running.

The Setup seems ok, AP working, but I can't connect to the marina hotspot, because "I am not authorized to change network settings" (see my post above).

I am leaving to our boat right now - can you give me a hint, please?

Martin


Sent from my iPad using Cruisers Sailing Forum

Which network settings are you trying to change?

My set up is..

Connect external wifi dongle, wlan1, to the marina wifi. Log on to marina wifi in epifany web browser.
In openplotter wifiAP tab, AP wifi device set to wlan0 (Internal wifi device in the Pi)
internet connect to share set to WLAN1
The click the enable wifi access point box and that's it, maybe need to log onto the marina wifi again.

[Alpenskipper]

I can't connect to the marina Hotspot with WLAN1, because I am not "authorized". I see the hotspot in Wifi taskbar.

Martin


Sent from my iPhone using Cruisers Sailing Forum

[conachair]

Originally Posted by Alpenskipper

I can't connect to the marina Hotspot with WLAN1, because I am not "authorized". I see the hotspot in Wifi taskbar.

Martin


Sent from my iPhone using Cruisers Sailing Forum

Hmmm.. Is the access point turned off in open plotter, & what make of usb wifi dongle is it?

Sent from my SGP511 using Tapatalk

[petter5]

Originally Posted by Alpenskipper

I want to rebroadcast a marina Hotspot, too (V 0.71b, RPI3, second WiFi dongle running.

The Setup seems ok, AP working, but I can't connect to the marina hotspot, because "I am not authorized to change network settings" (see my post above).

I am leaving to our boat right now - can you give me a hint, please?

Martin


Sent from my iPad using Cruisers Sailing Forum

Try to edit the config file directly using "sudo leafpad" and trhen open the config file.

[McElch]

Originally Posted by Alpenskipper

I can see WLAN1 in the networksettings in the taskbar, but I can not connect to another wifi net, because I am not authorized (all grey).

Are you logged in local or remotely? I observed same behavior when logged in from remote.

[Tacmed]

These openplotter units are maybe underpowered if they are to rebroadcast internet, manage onboard systems manage all sorts of other items.This software is a lot more powerfull than i thought. I hope everyone is throwing a few bucks to the developers

[snowboarder]

Originally Posted by Alpenskipper

I can't connect to the marina Hotspot with WLAN1, because I am not "authorized". I see the hotspot in Wifi taskbar.

Martin


Sent from my iPhone using Cruisers Sailing Forum

Same error here when i login with rdp (headless) , normal login with monitor is oke

[conachair]

Originally Posted by snowboarder

Same error here when i login with rdp (headless) , normal login with monitor is oke

Logging on remotely with VNC seems to be fine here.

[conachair]

Sailoog - outputs?
In v07.1beta I can't seem to do anything with the outputs. Any outputs created show up in the trigger menu but not in the actions menu, am I missing something?

Ta

[Sailoog]

Originally Posted by conachair

Sailoog - outputs?
In v07.1beta I can't seem to do anything with the outputs. Any outputs created show up in the trigger menu but not in the actions menu, am I missing something?

Ta

Sorry, that was a solved bug. Download the màster branch on github.


Sent from my fnac 5 using Cruisers Sailing Forum mobile app

[conachair]

Originally Posted by Sailoog

Sorry, that was a solved bug. Download the màster branch on github.


Sent from my fnac 5 using Cruisers Sailing Forum mobile app

Thanks, all good again

Sent from my SGP511 using Tapatalk

[affinite]

Can anyone give me some pointers on using this plugin with OCPN/OP. I'm on OP 0.7.1.
I'm trying to use the VDR plugin but cant get it to show any NMEA data.
I load the (demo) attachment.txt file and play it but see nothing.
Quite sure this is user-error but cant find anymore info on the OCN site or forum
Thx
Steve

[Didier B]

Hi all Openplotterists !

My config : Rpi2, V7.1beta, connected sensors : MPU9150, BMP180, HTU21, DS18B20 (2)

1- I couldn't calibrate properly the magnetometers of my MPU9150, Once I got more than 200 counts in each of the counters, I started the ellpsoid phase which terminated quickly, with a message :
Failed to execute RTEIIipsoidFit.m. Only
min/max calibration available.

I remember having seen a thread on that matter, but couldn't find it.

2 - I could register on OpenMarine, and posted same thread, which one to favour for bug reporting ?

[Sailoog]

Originally Posted by Didier B

I remember having seen a thread on that matter, but couldn't find it.

2 - I could register on OpenMarine, and posted same thread, which one to favour for bug reporting ?

Yes please, this is an example of the necessity of a more friendly site to search for old issues

Let's start with the new support forum

http://forum.openmarine.net/

[jpterj]

Originally Posted by jpterj

I will just use the NGW-1 instead for now then. It should do what I want, receive navigation and AIS info from the NMEA 2000 bus and send it to OpenCPN. I have also verified that XTE and other related info is sent from OpenCPN and to the NMEA 2000 bus, so think the autopilot should be able to read it.

I have a bit of a problem with OpenCPN if I connect the NGW-1 through Kplex.
The problem is that the system_input is UDP and the system_output is TCP.
If I set the localhost:10110 TCP to In/Out then XTE etc. is not sent because the system_input is UDP.
If I set up a separate connection for output then OpenCPN loops all messages received.
If I connect the NGW-1 directly to OpenCPN as In/Out then it works OK.

Is there a good reason for having the system_input as UDP and the system_output as TCP?